A Large Variety of Desktop E-Nail Kits, Portable E-Nails, Quartz Nails, Titanium Nails, and Accessories. One Year Warranty, Ships in 24 Hours. 710 your life!

Discount E-Nails

Dabbing

Vaping

Smoking

Showerhead Swiss Egg Percolator

 
Size: 10 Inches Tall
Weight: 14 Ounces
Joint Type: 14mm Female
Material: Borosilicate Glass
Included Accessories:
Quartz Banger Nail (for torches), bowl (for flower), silicone dab container

https://discountenails.com/

Showerhead Swiss Egg Percolator

SB Matrix Percolator Reclaim Rig

 
Size: 11.8 Inches Tall
Joint Type: 18mm Female
Included Accessories: Glass Slide (for flower)

https://discountenails.com/

SB Matrix Percolator Reclaim Rig

Long Recycler Inline Percolator Rig

 
Specifications:
Height: 15inches
Joint Size: 14mm Male
Thickness: 4mm
Weight: 13 Ounces
Included Extras: Bowl/Dome/Nail

https://discountenails.com/

Long Recycler Inline Percolator Rig

Fancier 25mm Axial Style Quartz Banger Nail
-Made for the axial style coil-

 
Includes:
1x Quartz Banger Nail
1x Metal Pin (to secure to coil)

 
Joint Sizes: 10mm, 14mm, 18mm
Joint Types: Male, Female

 
NOTE: Axial Coil is sold separately here:
https://discountenails.com/collections/accessories/products/5-pin-kevlar-coil?variant=32353538605131

Fancier 25mm Axial Style Quartz Banger Nail

Crossing Core 2.0 | 2.1 Stargazer Side-Mouthpiece Bubbler E-Rig Kit
Model Choice: 2.0 or 2.1

The one you've been waiting for... Core 2.0 e-rig with a black silicone sleeve and carb tether, 4-port spinner carb cap and V5 Heater!! 
When heater housing design and art combines! Meet the new rebuildable ceramic coil for the Core 2.0 E-Rig. The RDA V5 Ceramic Heater works on the original Core also. The original Core coil atomizers work on the Core 2.0 too! 
  
There are a some key differences between the Core and Core 2.0 e-rigs which are as follows: 
 
Core 2.0 runs V5 heaters, no wire based coils 
Atomizers contain only Metal and Ceramic, silicone and PEEK has been replaced with an all ceramic design 
Four heat settings are now all for the V5 heaters 
Fully rebuildable atomizers – no need to replace the whole housing, just the heater 
Decreased pre-heat time 
Increased session time 
Increased total run time (80 second full run time) 
Vortex airflow – included spinner carb cap 
“Unbreakable” aluminum carb cap replaces glass bubble carb 
Improved button function 
Upgraded Stainless Steel Carb Cap Tube 
 
 
Features 
 
One button functionality for ease of use 
Fully heated high polish ceramic vaping surface – elements inside base and walls of heater 
Rebuildable atomizer 
Vortex Airflow – Aluminum spinner carb cap with carb cap tether 
Borosilicate Glass Bubbler 
Stainless Steel Carb Cap Tube 
Four carefully tuned heat settings 
Isolated Aluminum and Glass Vapor Pathway 
Low maintenance 
Approx. 1 hour 45 minute charging time 
3150mah Li-Ion Battery Pack. 
 
 
What’s Included 
 
Core 2.0 E-rig Base 
Core Stargazer Side-Mouthpiece Bubbler 
Aluminum Spinner Carb Cap (based on our design) 
Carb Cap Tether (black) 
Silicone Base Cover/Sleeve (black) 
Atomizer with V5 heater installed 
Spare V5 Heater 
SS316 Dab Tool (based on our design) 
4 x Spare Atomizer Screws 
Screwdriver 
2 x Spare Carb Cap Tube O-rings 
1 x Wall Plug
1 x USB-C Charging Cable 
Cotton buds/Q-tips 
Alcohol wipes 
Upgraded Carry Case 

-(No factory glass bubbler included)-
 
 
Button Functions 
 
Hold – Manual fire up to 60 seconds 
Two clicks – Activate session mode – One click to cancel 
Three Clicks – Change heat setting 
Four Click – Display power level – Red/Low – White/Medium – Green/Full 
Five Clicks – Lock or unlock Core 2.0 Base 
 
 
Sessions times and temperatures 
 
The total session time for the Core 2.0 has been upgraded to 80 seconds, this includes the pre-heat time. 
 
Blue – 12.5 second pre-heat – Approx. 400° 
Green – 13 second pre-heat – Approx. 425° 
White – 17.5 second pre-heat – Approx. 465° 
Red – 22.5 second pre-heat – Approx. 500° 
 
 
Setup 
 
Charge your base using the provided wall plug and cable. 
Fill the bubbler from the top, when it is removed from the base. Ensure any excess liquid has been wiped away and that no water has flooded into the bottom compartment. If this happens turn the bubbler upside down and blow into the air hole at the bottom to clear this section. Then re-fill from the top. 

Place bubbler onto Core 2.0 Base at an angle, ensuring that the hole in the bubbler base aligns with the vapor pathway in the Core 2.0 base, then gently and firmly push it straight down into place. 

Check small screws in the atomizer base which hold the heater legs are done up fully. These need to be tightened so they are firm, but not so much that they cut the wire legs off the heater. When this is done screw the atomizer into the Core 2.0 base. 

Place the carb cap tube on the base so that the wider angled side sits at the top, leaving the carp cab on the tether so that you can load concentrate onto the heater. 
Select your desired heat setting (start low if you’re not sure). 

Now that’s all done we get onto the vaping methods as there are different ways the Core 2.0 can be used! 
 
 
Methods of Use 
 
Cold Starts – This method is best for getting the most flavor and material preservation as you start using as soon as vapor is being produced. Using it in this way will cause the session temperatures to be slightly lower than otherwise because the air passing around the heater will decrease heating speed. You can start your session at any point, we suggest keeping an eye on the button flashes so that you can always begin after a set number of flashes, if desired, providing a very consistent and repeatable experience. 
 
Load material into the heater 
Press the fire button twice to activate session mode 
When your concentrate starts to bubble begin using gently with the carb cap left off 
When the Core 2.0 base vibrates place the carb cap back on and continue your use as you normally would 
For subsequent sessions just use as desired, when the flavor leaves your material, the vapor becomes harsh or stops being produces press the fire button once more to cancel the session 
If you still have material left inside at the end of the session simple hit the fire button twice again and start using immediately, no need to wait for the vibrate as your heater will already be close to adequate temperature. The second session will always run a little hotter than the first if it is started straight after 
Hot Starts –  This way allows the heater to reach full temperature for any given setting; so this method is best for getting the maximum cloud production and effects as quickly as possible. 
 
Press the power button twice to activate session mode 
Load your material onto your dab tool – rice size 
Wait for the Core 2.0 base to vibrate indicating the session temperature has been reached 

While using gently load the dab into the heater, then replace the carb cap and use as your normally would

For subsequent sessions you can carry on as desired. The same applies here with regard to finishing your session. If your material is finished hit the fire button once to cancel the session early, if you still have material left simply hit it twice when the session has ended to start it again! 

As with cold starts, follow up sessions will always run a little hotter. 
Manual – Self explanatory, load a small rice size dab into the heater and hold down the power button. Use as desired. 
 
Manual hold can also be used instead of double pressing to finish a session or heat the heater for easier cleaning. 
 
 
 
Cleaning 
 
Wipe out heater with a Q-tip after each use 
Clean the area around the RDA heater weekly to stop residue building up 
Every month or so wipe out the airway with a Q-tip soaked in ISO – allow to fully dry before use 
Replace bubbler water daily 
To clean bubbler fill with hot water and shake to remove large residues. Soak in ISO to fully clean. Rinse thoroughly with warm water after soaking. 
 
 
Safety Features 
 
Over-charge 
Over-discharge/Low battery 
Over-heat 
Low heater resistance 
Short-circuit 
No atomizer 
 
 
Certifications 
 
CE Certified 
ROHS Certified Materials 
FCC Certification 
FDA Approved Silicone 
UN 38.3 Certified Li-Ion Battery Pack. 
Warning Lights – When your Core 2.0 base flashes three times it’s trying to tell you something… 
 
Blue – Short-circuit warning 
Green – No atomizer warning 
White – Over-heat warning 
Red – Low battery warning 
  
Warranty information 
 
For all warranty claims please contact the store you purchased from. 
The Core 2.0 power base is covered by a one year manufacturer warranty against defects. 
The Core 2.0 carry case is covered by a one year manufacturer warranty against defects. 
The atomizer is covered by a one week manufacturer warranty against defects. 
While atomizers are expected to last much longer than one week, they can be damaged by mishandling and misuse. We understand that not everyone will use the device daily or immediately so offer a one week warranty, from the date of delivery, to report any issue with your atomizer. 

Crossing Core 2.0 | 2.1 Stargazer Side Mouthpiece Bubbler E-Rig Kit

Pure Quartz Domeless Straight Nail For 16mm/20mm Coils

-Length=59.5mm
-2mm thick walls

Nail Size:
outer diameter- 15.5mm to fit 16mm coils and 19.5mm to fit 20mm coils

Rig joint size options:
14mm,18mm male or female

https://discountenails.com/

Domeless Straight Electric Quartz Nail-16/20mm coil size

Vaportime Flat Plug Style Nail

 
Coil Size Choices: 10mm and 16mm barrel style coils
Bottom Rig Fitment: 14&18mm female rig joints only

 
-Medical Grade 2 Titanium-

https://discountenails.com/

Vaportime Flat Plug Style Nail- 10mm&16mm

Nail Stand Glass Adapter

 
Size Choices: 14mm, 18mm- male or female

-Works with quartz and titanium nails
-A great way to store and protect your extra nails!

https://discountenails.com/

Nail Stand Glass Adapter

Terp Pearls

 
-Comes with 6x terp pearls-
(2x recommended per bowl)

 
Terp pearls – or dab pearls – are essentially little balls that spin around inside a banger. The terp pearls distribute heat inside the banger and disperse the oil for big draws!

 
Color choices:
5mm Clear or 6mm Glow in the Dark Mixed Colors

https://discountenails.com/

Terp Pearls Inserts

Crossing Core XL Kit
THE BRAND NEW CROSSING TECH CORE XL VAPORIZER IS HERE! A newly updated base with 6 heat settings, new XL atomizer, and new Grenade Glass bubbler!

The Core has been updated, to it's core! The new eRig has a brand new power base with 6 heat settings, a new high-flow glass percolator, and is fitted with the 3D XL atomizer! The carb cap and holder have also been modified for the new device. 

The Core XL E-rig is the latest portable e-rig from SZ Crossing A.K.A. CrossingTech. It is an all in one dab rig designed for use with a full range of concentrates, from thin oils to solid shatter style material. With a solid build made from high quality materials, a fully heated large capacity cup, vortex airflow and everything you need to get started (except concentrates) it provides the best entry level e-rig experience. After a little practice it rivals much more expensive devices! 

Atomizer Choices:
-Core XL with Non-Rebuildable Heater
With these you can replace the whole atomizer, the heater is fixed inside. They have been made since some people have no desire to replace heaters in housings so this more convenient solution exists

-Core XL with Rebuildable Heater
With these you can replace the ceramic heaters, ceramic spacers, and screws. This is a better option for technical individuals that like to tear down and rebuild their atomizers for a more hands on approach. 


Features

Core XL runs XL 3D Ceramic heaters only, no wire based coils
Atomizers contain only Metal and Ceramic, silicone and PEEK has been replaced with an all ceramic design
Six Heat settings
Increased total session time (80 second full run time)
Vortex airflow - included updated spinner carb cap
"Unbreakable" aluminium carb cap 
Improved button function
Upgraded Stainless Steel Carb Cap Tube
One button functionality for ease of use
Fully heated high polish ceramic vaping surface - elements inside base and walls of heater
Rebuildable or non-rebuildable atomizer options 
Borosilicate Glass Bubbler Grenade Bubbler - an upgrade over previous Core bubblers 
Updated Stainless Steel Carb Cap Tube and heat dissipator
Isolated Anodized Aluminium and Glass Vapor Pathway
Low maintenance 
Approx. 1 hour 45 minute charging time
3150mah Li-Ion Battery Pack
Approx. 21 full sessions - mixed power settings 
 

What's Included

Core XL E-rig Base with six heat settings
Core Grenade bubbler with better function and angled mouthpiece
Aluminum Spinner Carb Cap
Carb Cap Tether (black)
Silicone Base Cover/Sleeve (black)
Core XL 3D Ceramic Atomizer
SS316 Dab Tool
2 x Spare Carb Cap Tube O-rings
1 x USB-C Charging Cable
Cotton buds/Q-tips
Alcohol wipes 
Carry Case
 

Button Function

Two clicks - Activate session mode - One click to cancel
One Clicks - Change heat setting 
Four Click - Display power level - Red/Low - White/Medium - Green/Full
Five Clicks - Lock or unlock device
 

Sessions times and temperatures

The total session time for the Core XL has been upgraded to 80 seconds, this includes the pre-heat time. It now has 6 heat settings, click once to cycle through these. 

Purple / Lowest - 320f after preheat 
Yellow / Second lowest - 330f after preheat 
Blue / Middle - 350f after preheat
Green / Middle high - 395f after preheat
White / Second highest - 450f after preheat
Red / Highest - 500f after preheat
 

Setup

Always hold your e-rig upright! If you angle it during use concentrate will spill out the bucket! Now that's out the way...
Charge your base using the provided wall plug and cable. 
Fill the bubbler from the top, when it is removed from the base. Ensure any excess liquid has been wiped away and that no water has flooded into the bottom compartment. If this happens turn the bubbler upside down and blow into the air hole at the bottom to clear this section. Then re-fill from the top. 
Do not fill the bubbler past 1/4 fill height or you risk flooding the base and damaging the unit. Just above the airflow slits inside is fine.
When replacing the bubbler, place it on the base at an angle, ensuring that the hole in the bubbler base aligns with the vapor pathway, then gently and firmly push it straight down into place. 
For Rebuldable Atomizer check the small screws in the atomizer base which hold the heater legs are done up fully. These need to be tightened so they are firm, but not so much that they cut the wire legs off the heater. 
Select your desired heat setting (start low if you're not sure).
 

Vaping methods

Cold Starts - This method is best for getting the most flavour and material preservation as you start inhaling as soon as vapour is being produced. Vaping in this way will cause the session temperatures to be slightly lower than otherwise because the air passing around the heater will decrease heating speed.  You can start your inhale at any point, we suggest keeping an eye on the button flashes so that you can always begin inhaling after a set number of flashes, if desired, providing a very consistent and repeatable experience. 

Load a rice grain size dab (basmati not long grain) into the heater
Press the fire button twice to activate session mode
When your concentrate starts to bubble begin inhaling gently with the carb cap left off
When the Core 2.0 base vibrates place the carb cap back on and continue your inhale as you normally would
For subsequent inhalations just inhale as desired, when the flavour leaves your material, the vapor becomes harsh or stops being produces press the fire button once more to cancel the session
If you still have material left inside at the end of the session simple hit the fire button twice again and start vaping immediately, no need to wait for the vibrate as your heater will already be close to vaping temperature. The second session will always run a little hotter than the first if it is started straight after
It's been advised by the manufacturer to avoid doing hot starts where the dab is loaded into a pre-heated heater as this can crack the ceramic due to the temperature difference
Manual - Self explanatory, load a small rice size dab into the heater and hold down the power button. Inhale as desired. 

Manual hold can also be used instead of double pressing to finish a session or heat the heater for easier cleaning. 

 

Cleaning

Wipe out heater with a q-tip after each use
Clean the area around the atomizer weekly to stop residue building up
Every month or so wipe out the airway with a q-tip soaked in ISO - allow to fully dry before use
Replace bubbler water daily
To clean bubbler fill with hot water and shake to remove large residues. Soak in ISO to fully clean. Rinse thoroughly with warm water after soaking.  
The Core Atomizer can also be removed and screwed into a heat sink on our Pico Plus with auto-fire or an Arctic Fox or DNA-C box mod (with auto-fire), then run at 36W upside down for 1-2 mins to perform a burn off cycle to clean the heater back to new. This is optional. You can also use the CUB instead of a heat sink with this setup, the CUB can also be used with the atomizers as a standalone portable when paired with a box mod such as the Pico Plus. 
 

Safety Features 

Over-charge 
Over-discharge/Low battery
Over-heat 
Low heater resistance
Short-circuit 
No atomizer 
 

Certifications

CE Certified
ROHS Certified Materials
FCC Certification
FDA Approved Silicone
UN 38.3 Certified Li-Ion Battery Pack. 
 

Warning Lights - When your Core 2.0 base flashes three times it's trying to tell you something...

Blue - Short-circuit warning
Green - No atomizer warning
White - Over-heat warning
Red - Low battery warning
 

Warranty information

For all warranty claims please contact the store you purchased from.
The Core XL power base is covered by a one year manufacturer warranty against defects.
The atomizer is covered by a one week manufacturer warranty against defects, this can be damaged by aggressive cleaning or accidental damage from tools.
While atomizers are expected to last much longer than one week, they can be damaged by mishandling and misuse. We understand that not everyone will use the device daily or immediately so offer a one week warranty, from the date of delivery, to report any issue with your atomizer.

Note: older coils and RDAs from the Core and Core2 will work on the new Core XL.



Crossing Core XL Kit

Focus V Carta Sport
The CARTA SPORT introduces a fresh aesthetic with one-button simplicity, perfect for quick, on-the-go sessions. It supports the full line of INTELLI-CORE® atomizers and debuts the all-new CARTA CONNECT, a removable silicone airpath that makes cleaning effortless and opens up a new world of compatibility and customization.

-UP TO 50 DABS PER CHARGE
-CARTA CONNECT
-CONTROL STICK
-INTELLI-CORE® COMPATIBLE
-CARTA GLASS COMPATIBLE
-BLUETOOTH ENABLED
-V REWARDS

WHAT'S INCLUDED:

Water resistant Carrying Case with Shoulder Strap, Silicone Stopper, Loading Tool, Cleaning Swabs, Cleaning Wipes and Owners Manual.

Description
Focus V CARTA Sport
The CARTA Sport is Focus V’s new version of the CARTA Classic. This new electric dab rig has great new accessories. This includes the CARTA Connect and a Control Stick. It also comes with a bigger battery and a Black CARTA Glass Top.

The new, removable CARTA Connect is an air path system that enhances the airflow when you inhale. It fixes reclaim issues to help you get the most from your product. It also makes cleaning your device easier as it is completely removable. We have attached a photo below for reference. 

The air path (CARTA Connect) is removable for simple cleaning. You can put it in the freezer for 10 minutes and use the Loading Tool to scrape off any leftover concentrates.

The Sport also has a new Control Stick. It includes a carb cap for better airflow and taste.

This design heats the product better than before. They make the stick from strong glass and add textured silicone for a better grip. The Control Stick works with all Intelli-Core atomizers and all tethers.

The CARTA Sport has one button, so you don’t need an OLED screen. The battery is also 35% bigger than the CARTA 2 for more dabs per hour. The software now has a longer battery life of up to 50 days per charge. 

Features
Bluetooth enabled
Fully compatible with Intelli-Core atomizers (including MAX)
Compatible with CARTA Glass
Up to 50 dabs per charge
Redeemable V Rewards
Control Stick
CARTA Connect
Comfortable grip
Black glass top
35% larger battery than CARTA 2
Up to 50 dabs per charge
Adjustable presets
Low Power Mode
Includes
1x CARTA Sport Device
1x Intelli-Core Standard Atomizer
1x Owners Manual
1x Black CARTA Glass top
1x Silicone Stopper
Cleaning Wipes
Cleaning Swabs
1x Loading Tool
1x Water Resistant Carrying Case with Strap

Quick Start
Download the Focus V app ‘V Browser’ for custom control.
Click the button 5 times to turn on/off
The device will vibrate, letting you know it is on/off
Double click to start the session
Double click to extend the session by 10 seconds
Single click to end the session
LED will change to orange when heating
Three clicks to cycle through the 5 presets
One click to see which preset you have selected
The LED color will change based on the preset you select 
Four clicks will show you the battery light/level
Click four times and hold the fourth click down to enable Low Power Mode


Blue LED: 480°F
Yellow LED: 495°F
Green LED: 515°F
Purple LED: 535°F
Red LED: 565°F


Always read the user manual for proper use and upkeep

Helpful Resources
How to Use CARTA Sport
Download the V Browser App
Product Registration
Tech Specs
Power Supply    Built-in Battery
Battery Life    50 Dabs per Charge
Heat Time    30 Seconds
Heat Style    Conduction
Temperature    480°F – 565 °F
Use With    Concentrates or Dry Herb
Warranty    1 Year with Focus V
Weight    454g
Connectivity     Bluetooth
Compatible With    CARTA Glass, Intelli-Core Atomizers

Focus V Carta Sport

Paramour 4 Smart E-Rig Kit
The Paramour 4 changed everything. Right size to hold in one hand, Craft your perfect dabbing experience with precision using Paramour 4, a high-performing 3D Ceramic Heating Chamber featuring the Joystick Cap and laser cut perc slots, make Full Heating Full Flavor. Last you about 30 sessions before needing a recharge. Featuring premium water filtration for smoother hits, unique user heat settings and a single-button interface, The Paramour 4 makes enjoying hash easy.
 

Easy One-Button Control:
Built-in buttons and east user-friendly LED display. Enjoy a hassle-free experience with direct temperature control and automatic heating.
 

Precise Temperature Adjustment:
Instead of fixed temperature increments, customize your experience with precision, paired with the 3D ceramic chamber, fine-tuning the temperature to achieve the perfect dab
 

Powerful Hits:
Powerful hits that deliver heavy clouds for an intense dab session

What's Included
Paramour 4 Device, Loading Tool, Micro USB Cable

Paramour Protection & Warranty
The Paramour 4 is covered for 180 days under the Paramour warranty

Paramour 4 Smart E-Rig Kit

Quartz Banger Nail

 
Fits 19.8/20mm inner diameter heating coils. Factory certified quartz.
The nail fitment is 14/18mm male for rig joint size
-Arm/Rest/Holder for coil

 
Includes:
1x Quartz Banger Nail

https://discountenails.com/

Quartz Banger Nail 14/18mm

Quartz Banger Nail 14/18mm. Fits 19.8/20mm inner diameter heating coils. Factory certified quartz. 

Greenlightvapes G9 Epro

The EPro from Greenlight Vapes is a premium E-Nail Rig Vaporizer that uses a heavy duty 3000mAh battery with digital display screen, a removable ceramic heater with 3 interchangeable bowl types and an intricate glass water recycler.

It's advanced 3000mAh Lithium-ion battery is easily operated using a user-friendly 3 button interface and the digital screen displays all important information neatly in one place.

You can press the EPro Wax Vaporizer's power button 5 times to turn the battery on. While on the digital display screen will show your battery life, selected bowl type, a session timer, desired temperature and current temperature.

Press the  + / - buttons simultaneously to enter the bowl selection mode. Scroll through the different types using the + / - buttons and then lock in your choice by clicking the power button once. You have three bowl types in each kit (Quartz, Ceramic, Titanium) that can be easily swapped so you always get the exact results you prefer.

Use the - / + buttons to precisely select your desired temperature level in 10° increments anywhere within the range of 280-800°F. With such a wide range to work with you're guaranteed to have the perfect heat setting for any type of concentrated oil you decide to vape.

After you have chosen your temperature level you can click the power button 3 times to start a heating cycle. The EPro Dab Rig will emit an audible beeping tone to indicate it has begun heating. It takes about 30 seconds to reach the desired temperature followed by a long beeping tone. After it reaches your desired temperature it will continue to heat the chamber for 60 more seconds before automatically cutting off it's power.

As you vape your waxy oils the vapor filters through a high quality glass water recycler with multiple chambers that guarantees a smooth vapor that is absolutely packed with clean tasting flavors. You also have a premium quartz glass carb with silicone tether to easily control airflow throughout your session with great precision.

The G9 EPro Concentrate Vaporizer's also comes equipped with a non-stick silicone jar to store your concentrates and a collection of cleaning accessories to keep the device working as it does out of the box for plenty of time to come.

Invest in the EPro Rig Style Concentrate Vaporizer from Greenlight Vapes today and heat your concentrates on the go the right way.

 

Features & Specs

    Premium Concentrate Rig with Digital Display
    100% Authentic Greenlight Vapes Brand Guaranteed
    Dimensions: About 239.2mm Tall (w/ Glass) x 41.5mm Wide (Base)
    Device Weight: About 14.9 ounces
    High Quality Hand-Blow Glass Water Recycler with Multiple Chambers
    Premium Quartz Glass Carb Cap with Silicone Tether
    Uses Removable/Replaceable Ceramic Heater Base
    Includes 3 Interchangeable Bowl Types (Ceramic, Quartz, Titanium)
    Heavy Duty Base with Long-lasting 3000mAh Battery
    Versatile Temp Control Range: 280-800°F (Adjusted in 10° increments)
    Reaches Desired Temperature Level in About 30 Seconds
    Extended 60 Second Heating Duration Cycle
    Digital Screen Displays Temp Settings, Puff Counter, Timer, Battery Life & More
    Ultra Convenient Auditory Notification System
    Easy Micro USB Charging Method with Passthrough
    User-Friendly Three Button Control Interface
    Press Power Button 5 Times to Turn On/Off
    Press Power Button 3 Times to Begin Heating Cycle
    Press + / - Buttons Simultaneously to Select Bowl Type
    Use  + / - Buttons to Select Temperature Setting

     Included:

    1 x G9 EPro Dab Nail Vaporizer
    1 x Removable Ceramic Heater Base
    1 x Handmade Glass Recycler
    1 x Ceramic Bowl
    1 x Titanium Bowl
    1 x Quartz Bowl
    1 x Glass Carb Cap with Tether
    3 x Cotton Swabs
    2 x Alcohol Wipes
    1 x Dab Tool
    1 x Silicone Jar
    1 x USB Charger
    1 x Set of Spare O-Rings

Optional Add On: Epro Silicone Dab Tray/Holder

https://discountenails.com/

Greenlightvapes G9 Epro

The EPro from Greenlight Vapes is a premium E-Nail Rig Vaporizer that uses a heavy duty 3000mAh battery for dabbing. 

SOC Peak Vaporizer Kit

Colors: Black, White, Blue

Features:

    2600mAh Battery
    4 Temperature Settings from 450° F to 600° F
    Sesh Mode: Increase Heat and duration by 15 seconds
    Lightning Warmup & LED Light Indicator
    Micro USB Rechargeable
    Compact 6.25" tall; 3.5" wide and 2.75" deep

Take the best from the Puffco Peak, Kandypens Oura, Dr. Dabber Switch, and put them into a compact, affordable package and you would get this, the SOC E-Nail! The SOC is a portable concentrate e-rig vape capable of heating up to 600° F in under 30 seconds, allowing you to enjoy your essential oils and concentrates without the hassle of breaking out your glass rig and blowtorch. Simply choose from 4 temperature settings, heat it up, and enjoy!

S.O.C. stands for System on Chip, meaning the SOC is run by a smart on-board chip, allowing it to accurately reach and maintain temperatures and overall system settings throughout uses. Just like the Puffco Peak, the SOC uses a ceramic bowl with a ceramic topper for efficient heating and large cloud production. If you're into cloud chasing and love producing huge vapor clouds, the SOC has got you covered!

The SOC is only 6.25" tall making it one of the shortest E Rigs on the market today, and also one of the hottest! With a max temperature of 600° F coupled with a ceramic chamber to ensure maximum vapor, any concentrate or oil you put inside will give you one of the best experiences when you draw it out!
Four Temperature Settings

Low

Med

High

Peak

The SOC features 4 temperature settings, from 450° F to 600° F, in 50° increments. To cycle through the temp settings, click the button three times while the device is not heating up.

    Low (Small Load): 450° F
    Medium (Medium Load): 500° F
    High (Large Load): 550° F
    Peak (XL Load): 600° F

The SOC device features intelligent temperature calibration, which provides a more consistent experience during repeated use. This means that, though the average heat up time is around 30 seconds, actual times may vary.
Checking the SOC's 2600mAh Battery

100% - 75%

75% - 50%

50% - 25%

25% - 0%

While the SOC vape is on, click the power button once at any time to display the remaining battery life. The battery life is indicated by color, and you can fully charge the battery in 2.5 hours.

    100% - 75%
    75% - 50%
    50% - 25%
    25% - 0%

Engaging the SOC Peak "Sesh Mode"

The SOC has got you covered! This awesome vape has a "sesh mode" that increases heat and extends your session by 15 seconds. Use it to boost heat or to share with your friends.

Whether you want to share or if you want more vapor, simply double click when the SOC is at its target temperature to initiate sesh mode. Any time you want to extend it, just tap the button twice again and as often as you need to enjoy everything your concentrate's got!
What's Included with the SOC Vape

Open up the box and you'll find everything packed nicely within a custom-cut foam padding. There are two levels, so once you take out the SOC E-Rig don't forget to take out one layer of foam!

    SOC Base, 2600mAh Li-Ion Battery
    Hand Blown borosilicate Glass Piece
    Removable Atomizer
    3x Ceramic Bowls
    Ceramic Atomizer Cover
    Hand Blown Carb Cap
    Metal Loading Tool
    Silicone Storage Jar
    3x Snappable, Isopropyl Alcohol-filled Cotton Swabs
    USB recharging cable

The SOC is loaded with everything necessary for a good time, and even comes with replacement ceramic bowls.
How to Use Your SOC Portable E-Rig

Interested in learning how to use the SOC before you get it? Check out this Quick Start guide!

    Fully charge device before first use. Device pulses white while charging and turns off automatically when complete.
    With the glass chamber removed from the base, fill glass with water just above the air holes. Do not fill glass while attached to base. If necessary, dry the glass to ensure no water is allowed into the lower section.
    Align inlet hole on the front of the glass with atomizer. Carefully push the front of the glass into the base, then the back.
    To lock / unlock the device, quickly click the power button 5 times.
    Quickly click the button 3 times to select heat settings.

    Blue: 450° F; Green: 500° F; Orange: 550° F; White: 600° F.
    Use the Metal Loading Tool to place contents on the bottom surface of the bowl (not the sides).
    Place carb cap on top of atomizer.
    Hold the button for 3 seconds to initiate heat-up. Pulsing light indicates heat-up mode is active.

    Because the system uses smart technology to adjust the heating based on content the heating time may vary, but the average heating time is around 30 seconds.
    Heating can be canceled at any time by holding the button again.
    When fully heated, the SOC will emit a long beeping tone and the light will flash. Inhale gently for the best results!
    Use a cotton swab to clean the chamber after each use.

Follow these instructions and you will keep your SOC in tip-top shape for years to come.
Cleaning Instructions

Proper cleaning is just as important as enjoying your concentrates. SOC recommends a thorough cleaning every 20 uses and following these simple instructions will help you keep your device working like new all throughout its life. These same instructions are inside the manual.

    Ensure everything has cooled before starting.
    Remove the Glass Chamber before unscrewing or re-inserting the atomizer.
    Clean carb cap and glass by soaking in isopropyl alcohol. Rinse clean with water after.
    Atomizer can be cleaned with isopropyl alcohol fully assembled or disassembled (all ceramic pieces removed; see instructions for detailed view). Be sure to clean gold connector on base and bottom of atomizer with an alcohol soaked cotton swab.

    If your bowl cannot be easily removed, do not attempt to forcefully remove it.
    WARNING: After cleaning, allow all parts to dry thoroughly before use. Do not get the base wet- it's electric and will break or short circuit.

https://discountenails.com/

SOC Peak Vaporizer Kit

The SOC is a portable concentrate e-rig vape capable of heating up to 600° F in under 30 seconds

Fancier 25mm Axial Style Coil Quartz Banger Kit
Nail: 25mm Axial Style Quartz Banger Nail (Choose joint size)
Case Color: Black Carbon Fiber/Camouflage

Rig Joint Size Choices (Bottom of Nail):
10mm/14mm/18mm Male or Female

*Reaches 710 degrees in about 2-3 minutes*
*Temperature range is 0-999 degrees*

 
Includes:
  
1* Digital Temperature Controller 
1* Heating Coil (25mm/inner Diameter)
 1* Power Cable 1
* 25mm Quartz Nail (hoose your rig joint size) 
1* Glass Carb Cap 
1* Portable Carrying Case 
1* Instruction Manual
1* Metal nail/coil Fastener Clip
 

 
Fancier E-Nail Specifications:
Brand Name 	Fancier
Key Words 	Fancier Nail, Fancier E Nail, Fancier Nail
Voltage 	AC110V -240V 50-60HZ
Temperature Range 	Room Temperature~999 Degrees °F
Temperature stability 	Approximately 5°F-7°F
Quartz Nail
	25mm Coil Size With 10/14/18mm Male/Female Rig Joint Sizes
Coil Shape 	Barrel (Spiral) 
Length of coil 	1.5 Meter (5ft) Kevlar Fireproof Sheath
Thermocouple Type 	“K” type
PID Dimension/unit 	  3.5 x 1.5 x 5.0 inch (93x37x129mm) 
Approximate Size

https://discountenails.com/

Fancier 25mm Axial Style Coil Quartz Banger Kit

Crossing 30MM Quartz Micro E-Nail Kit

1. Comes with a 30mm Quartz Nail: 14mm male rig joint

(we sell quartz adapters separately to fit different joints)

2.Auto shut off timer function (you can set the time)

3.Black and Green mini/micro size control box.

4.Heats up only 45 SECONDS to 710 degrees.

5.More convenient, heats up fast.

6.Has a very long operating

life.

How to operate:

-Hold down the middle button for 5 seconds to turn on/off the unit.

-Click - to decrease temperature in increments of 5 degrees Fahrenheit and click + to increase temperature in increments of 5 degrees Fahrenheit.

-Click the middle button 5 times to change the auto shut off time from 0-5 hours.

-0 means no shut off.

-The default shut off time is 2 hours.

-The temperature range is from 220F-990F

 

Includes:

1 Controller Box

1 Opaque Joint Quartz Nail 30mm Coil Size

(14mm male rig joint)

1 Quartz Bowl (Nail Insert)

1 Glass Carb Cap

1 Nail-Coil Metal Pin Fastener

1 Charging Cord

1 Power Chord

1 Gift Box

1 User Manual

Specifications:
Brand name 	Crossing
Model 	Mini/Micro E-nail
Color 	black and green
Updated Features
Shut off timer
Weight 	0.8KG
Power 	150W
Temperature 	220°F~999°F
Voltage 	120v
The length of power line 	1.8M
The length of heating ring 	1.2M
The material of heating coil
Stainless steel
The material of box 	middle aluminium alloy, two sides plastic
The material of the nail 	
titanium grade 2
The material of heating wire cover
	

Fire proof kevlar
Warranty
	

heating cord: 3 months

control box:1 year

https://discountenails.com/

Crossing 30MM Quartz Micro E-Nail Kit

KanboroTech Giant

 Colors: White and Black

Technical specifications:

Use for: wax/concentrates

Input: 5V/1A

Li-Ion battery 1500mAh

Resistance(Ω): ：1.2±0.05ohm

Instant-heat coil

Color:black or white

Ceramic Vapor Tip

Material: Stainless steel

 

Feature:

*2in1 dip &dab stick vaporizer

*No chamber to load. No torch

*Rechargeable 1500mAh Li-on battery

* Instant-heat coil --Ceramic Vapor Tip

*Mini high borosilicate glass with water filtration

*Micro-USB charging

*Cool stand. Easy to clean

 

Package includes:

1 Gaint vaporizer

1 Silicone rings

1 Glass bubbler

1 Cleaning swap

1 Micro USB cable

1 Silicone container

1 Spare ceramic nozzle

1 User manual

1 Elegant box

https://discountenails.com/

KanboroTech Giant

Greelightvapes G9 G-Dip Kit
(colors: Black/Gold/Blue)

Description
The G-dip is a unique and muti-functional pen for concentrates . 
The innovative crush ceramic or quartz vapor tip atomizer is a convenient and simply way to dab without a rig and torch or any coil heater for more pure tastes.
  The vapor tip atomizer allows the user to use the dipper like a traditional pack-and-go unit but get a timed hit.
The Heating element of the G-dip makes it possible to vaporize your extracts effortlessly.

The G-Dip Pen Kit includes:

1 GDip vaporizer
2 Vapor tips (quartz&ceramic)
1 Glass bubbler
1 Cleaning swap
1 Micro USB cable
1 Silicone container
1 User manual
1 Elegant Box(Plastic Travel case)

G-Dip Pen Technical specifications:
5 clicks to start on/off system
Li-Ion battery 16450/1000mAh
Battery level indicator lights
Miniaturized glass bubbler
Overheat/short-circuit protection
Instant-heat coil
Ceramic Vapor Tip
Quartz Vapor Tip
Compact Design & Durable

Full charge lasts 40-50 times

 

How To Use The G-Dip Pen:
Firstly, make sure the device is fully charged before operations. 
1.Fill miniaturized glass bubbler to 1/4 level with water through the mouthpiece (if you want water filtering).
2.Connect the vapor tip to the GDip body.
3.Attach the glass bubbler to the opposite end.
4.Quickly press the power button 5 times to start on/off the system. The LED indicator lights(Red & Green) will flash 5 times.
5.Hold the button, and wait for few seconds to pre-heat. While holding the button, lightly touch the vapor tip to your desired essential oils or concentrates. Then gently enjoy through glass bubbler mouthpiece.

During heating, the LED indicator lights will stay with red or green color. Green light shows the battery level is over 50%, and red light shows the battery level is less than 50%

https://discountenails.com/

G9 Greenlightvapes Gdip Kit

Kanboro Tech Sub Dab Pro

 
The Kanboro Tech Subdab Pro Portable e-nail is the higher end big brother to the Subdab Portable e-nail. The Subdab Pro Portable e-nail features a removable 2500 mAh 18650 battery with Micro USB charging which should give you between 35 and 50 uses per full charge. There is a replaceable ceramic cup atomizer to hold your full melt concentrates. The unit comes with a 14mm or 18mm adapter to use with your favorite glass water pipe.


Features & Specifications
Battery: 2500 mAh Removable 18650 Battery
3 Click Turn On/Off
3 Seconds to 400°F, 10 Seconds to 600°F
14 and 18mm Water Pipe Adapter Included
Pure Ceramic Nail For Quick Heating and Clean Taste


1) Subdab is a 2 in 1 portable and water pipe e-nail vaporizer. It can be used alone or with a water pipe bong.
2) Easy to use, portable, durable and powerful. It is small enough to take anywhere, and durable enough to use on the largest water pipes.
3) Heats up in only 3 seconds to 400F, and 10 seconds to 600F, allowing for the best dab conditions.

https://discountenails.com/

Kanboro Tech Sub Dab Pro

Vapor Time Pure Quartz Diamond Knot Nail For 16mm/20mm Coils
Overall the diamond knot is one of the most efficient nails. The sleek & elegant design can even be used with no carb cap. It Features more heating surface!
Nail Size:
outer diameter- 15.6mm to fit 16mm coils and 19.6mm to fit 19.8 or 20mm coils
Rig joint size options:
10mm,14mm,18mm male or female
(choose all options above)

https://discountenails.com/

Vapor Time Diamond Knot Quartz Nail

Quartz Banger Nail

 
Fits only 19.8/20mm inner diameter heating coils. Factory certified quartz.
The nail joint size is 14/18mm male. With the quartz female adapter, the fitment is 4 in 1 14/18mm male or female.
Fits most Rigs.

 
Includes:
-Quartz Banger Nail
-14/18mm Female Adapter
-Quartz Carb Cap

https://discountenails.com/

Quartz Banger Nail 14/18mm Kit

Crossing Core 2.1 E-Rig Kit  

The Crossing Core 2.1 is a significant upgrade over the Crossing Core 2.0 in several key areas. Firstly, the Core 2.1 features a more powerful 3150mAh battery, providing longer and more consistent performance compared to the Core 2.0. This means that you won't have to worry about running out of power during your dabbing sessions.
 


Non Rebuildable 3D Atomizer

The Core 2.1 features a non rebuildable 3D atomizer which will provide a much higher overall quality. It also removes the need for the tools required to dismantle and put together the Atomizer. Shenzhen Crossing understood that most consumers look for relaxation when vaporizing and the extra rebuild step is simply not worth it. They've been designed for people who aren't comfortable rebuilding their setups. Simply unscrew the old and screw in the new!

* Direct Heat from the Ceramic Bucket
* Ceramic and Stainless Steel Build
* Larger Vapor and Better Taste
* Quicker Warm-up
* Exchangeable

Another major improvement in the Core 2.1 is its precision temperature control system, which allows you to set your desired temperature with greater accuracy. The newest version features 4 temperature settings that are indicated by a color. This results in a much more consistent and enjoyable dabbing experience, as you are able to fine-tune the temperature for your specific concentrates and oils.


Here are the major key differences between the Core and Core 2.1 e-rigs which are as follows: 
 
Core 2.1 runs a rock solid nonrebuildable 3D atomizer, no wire based coils 
Atomizers contain only Metal and Ceramic, silicone and PEEK has been replaced with an all ceramic design 
larger 3150mAh battery
Four heat settings are now all for the 2.1 3D atomizer 
Decreased pre-heat time 
Increased session time 
Increased total run time (80 second full run time) 
Improved button function 
 
 
Core 2.1 Features:
 
One button functionality for ease of use 
Fully heated high polish ceramic vaping surface – elements inside base and walls of heater 
Non-Rebuildable atomizer 
Vortex Airflow – Aluminum spinner carb cap with carb cap tether 
Borosilicate Glass Bubbler 
Stainless Steel Carb Cap Tube 
Four carefully tuned heat settings 
Isolated Aluminum and Glass Vapor Pathway 
Low maintenance 
Approx. 1 hour 45 minute charging time 
3150mah Li-Ion Battery Pack. 
 
 
What’s Included:
 
Core 2.1 E-rig Base 
Core Bubbler 
Aluminum Spinner Carb Cap (based on our design) 
Carb Cap Tether (black) 
Silicone Base Cover/Sleeve (black) 
2.1 3D Atomizer
SS316 Dab Tool (based on our design) 
2 x Spare Carb Cap Tube O-rings 
1 x Wall Plug – US inside – UK included for UK orders 
1 x USB-C Charging Cable 
Cotton buds/Q-tips 
Alcohol wipes 
Upgraded Carry Case 
 
 
Button Functions:
 
Hold – Manual fire up to 60 seconds 
Two clicks – Activate session mode – One click to cancel 
Three Clicks – Change heat setting 
Four Click – Display power level – Red/Low – White/Medium – Green/Full 
Five Clicks – Lock or unlock Core 2.1 Base 
 
 
Sessions times and temperatures 
 
The total session time for the Core 2.1 has been upgraded to 80 seconds, this includes the pre-heat time. 
 
Blue – 12.5 second pre-heat – Approx. 205°C
Green – 13 second pre-heat – Approx. 220° 
White – 17.5 second pre-heat – Approx. 240° 
Red – 22.5 second pre-heat – Approx. 260° 
 
 
Setup 
 
Charge your base using the provided wall plug and cable. 
Fill the bubbler from the top, when it is removed from the base. Ensure any excess liquid has been wiped away and that no water has flooded into the bottom compartment. If this happens turn the bubbler upside down and blow into the air hole at the bottom to clear this section. Then re-fill from the top. 

Place bubbler onto Core 2.1 Base at an angle, ensuring that the hole in the bubbler base aligns with the vapor pathway in the Core 2.1 base, then gently and firmly push it straight down into place. 

Check small screws in the atomizer base which hold the heater legs are done up fully. These need to be tightened so they are firm, but not so much that they cut the wire legs off the heater. When this is done screw the atomizer into the Core 2.1 base. 

Place the carb cap tube on the base so that the wider angled side sits at the top, leaving the carp cab on the tether so that you can load concentrate onto the heater. 
Select your desired heat setting (start low if you’re not sure). 

Now that’s all done we get onto the vaping methods as there are different ways the Core 2.1 can be used! 
 
 
Methods of Use 
 
Cold Starts – This method is best for getting the most flavor and material preservation as you start using as soon as vapor is being produced. Using it in this way will cause the session temperatures to be slightly lower than otherwise because the air passing around the heater will decrease heating speed. You can start your session at any point, we suggest keeping an eye on the button flashes so that you can always begin after a set number of flashes, if desired, providing a very consistent and repeatable experience. 
 
Load material into the heater 
Press the fire button twice to activate session mode 
When your concentrate starts to bubble begin using gently with the carb cap left off 
When the Core 2.1 base vibrates place the carb cap back on and continue your use as you normally would 
For subsequent sessions just use as desired, when the flavor leaves your material, the vapor becomes harsh or stops being produces press the fire button once more to cancel the session 
If you still have material left inside at the end of the session simple hit the fire button twice again and start using immediately, no need to wait for the vibrate as your heater will already be close to adequate temperature. The second session will always run a little hotter than the first if it is started straight after 
Hot Starts –  This way allows the heater to reach full temperature for any given setting; so this method is best for getting the maximum cloud production and effects as quickly as possible. 
 
Press the power button twice to activate session mode 
Load your material onto your dab tool – rice size 
Wait for the Core 2.1 base to vibrate indicating the session temperature has been reached 

While using gently load the dab into the heater, then replace the carb cap and use as your normally would

For subsequent sessions you can carry on as desired. The same applies here with regard to finishing your session. If your material is finished hit the fire button once to cancel the session early, if you still have material left simply hit it twice when the session has ended to start it again! 

As with cold starts, follow up sessions will always run a little hotter. 
Manual – Self explanatory, load a small rice size dab into the heater and hold down the power button. Use as desired. 
 
Manual hold can also be used instead of double pressing to finish a session or heat the heater for easier cleaning. 
 
 
 
Cleaning 
 
Wipe out heater with a Q-tip after each use 
Clean the area around the RDA heater weekly to stop residue building up 
Every month or so wipe out the airway with a Q-tip soaked in ISO – allow to fully dry before use 
Replace bubbler water daily 
To clean bubbler fill with hot water and shake to remove large residues. Soak in ISO to fully clean. Rinse thoroughly with warm water after soaking. 
 
 
Safety Features 
 
Over-charge 
Over-discharge/Low battery 
Over-heat 
Low heater resistance 
Short-circuit 
No atomizer 
 
 
Certifications 
 
CE Certified 
ROHS Certified Materials 
FCC Certification 
FDA Approved Silicone 
UN 38.3 Certified Li-Ion Battery Pack. 
Warning Lights – When your Core 2.1 base flashes three times it’s trying to tell you something… 
 
Blue – Short-circuit warning 
Green – No atomizer warning 
White – Over-heat warning 
Red – Low battery warning 
  
Warranty information 
 
For all warranty claims please contact the store you purchased from. 
The Core 2.1 power base is covered by a one year manufacturer warranty against defects. 
The Core 2.1 carry case is covered by a one year manufacturer warranty against defects. 
The atomizer is covered by a one week manufacturer warranty against defects. 
While atomizers are expected to last much longer than one week, they can be damaged by mishandling and misuse. We understand that not everyone will use the device daily or immediately so offer a one week warranty, from the date of delivery, to report any issue with your atomizer. 

Crossing Core 2.1 E-Rig Kit

Crossing Core 2.0 E-Rig Kit
The one you've been waiting for... Core 2.0 e-rig with a black silicone sleeve and carb tether, 4-port spinner carb cap and V5 Heater!! 
When heater housing design and art combines! Meet the new rebuildable ceramic coil for the Core 2.0 E-Rig. The RDA V5 Ceramic Heater works on the original Core also. The original Core coil atomizers work on the Core 2.0 too! 
  
There are a some key differences between the Core and Core 2.0 e-rigs which are as follows: 
 
Core 2.0 runs V5 heaters, no wire based coils 
Atomizers contain only Metal and Ceramic, silicone and PEEK has been replaced with an all ceramic design 
Four heat settings are now all for the V5 heaters 
Fully rebuildable atomizers – no need to replace the whole housing, just the heater 
Decreased pre-heat time 
Increased session time 
Increased total run time (80 second full run time) 
Vortex airflow – included spinner carb cap 
“Unbreakable” aluminum carb cap replaces glass bubble carb 
Improved button function 
Upgraded Stainless Steel Carb Cap Tube 
 
 
Features 
 
One button functionality for ease of use 
Fully heated high polish ceramic vaping surface – elements inside base and walls of heater 
Rebuildable atomizer 
Vortex Airflow – Aluminum spinner carb cap with carb cap tether 
Borosilicate Glass Bubbler 
Stainless Steel Carb Cap Tube 
Four carefully tuned heat settings 
Isolated Aluminum and Glass Vapor Pathway 
Low maintenance 
Approx. 1 hour 45 minute charging time 
3150mah Li-Ion Battery Pack. 
 
 
What’s Included 
 
Core 2.0 E-rig Base 
Core Bubbler 
Aluminum Spinner Carb Cap (based on our design) 
Carb Cap Tether (black) 
Silicone Base Cover/Sleeve (black) 
Atomizer with V5 heater installed 
Spare V5 Heater 
SS316 Dab Tool (based on our design) 
4 x Spare Atomizer Screws 
Screwdriver 
2 x Spare Carb Cap Tube O-rings 
1 x Wall Plug – US inside – UK included for UK orders 
1 x USB-C Charging Cable 
Cotton buds/Q-tips 
Alcohol wipes 
Upgraded Carry Case 
 
 
Button Functions 
 
Hold – Manual fire up to 60 seconds 
Two clicks – Activate session mode – One click to cancel 
Three Clicks – Change heat setting 
Four Click – Display power level – Red/Low – White/Medium – Green/Full 
Five Clicks – Lock or unlock Core 2.0 Base 
 
 
Sessions times and temperatures 
 
The total session time for the Core 2.0 has been upgraded to 80 seconds, this includes the pre-heat time. 
 
Blue – 12.5 second pre-heat – Approx. 400° 
Green – 13 second pre-heat – Approx. 425° 
White – 17.5 second pre-heat – Approx. 465° 
Red – 22.5 second pre-heat – Approx. 500° 
 
 
Setup 
 
Charge your base using the provided wall plug and cable. 
Fill the bubbler from the top, when it is removed from the base. Ensure any excess liquid has been wiped away and that no water has flooded into the bottom compartment. If this happens turn the bubbler upside down and blow into the air hole at the bottom to clear this section. Then re-fill from the top. 

Place bubbler onto Core 2.0 Base at an angle, ensuring that the hole in the bubbler base aligns with the vapor pathway in the Core 2.0 base, then gently and firmly push it straight down into place. 

Check small screws in the atomizer base which hold the heater legs are done up fully. These need to be tightened so they are firm, but not so much that they cut the wire legs off the heater. When this is done screw the atomizer into the Core 2.0 base. 

Place the carb cap tube on the base so that the wider angled side sits at the top, leaving the carp cab on the tether so that you can load concentrate onto the heater. 
Select your desired heat setting (start low if you’re not sure). 

Now that’s all done we get onto the vaping methods as there are different ways the Core 2.0 can be used! 
 
 
Methods of Use 
 
Cold Starts – This method is best for getting the most flavor and material preservation as you start using as soon as vapor is being produced. Using it in this way will cause the session temperatures to be slightly lower than otherwise because the air passing around the heater will decrease heating speed. You can start your session at any point, we suggest keeping an eye on the button flashes so that you can always begin after a set number of flashes, if desired, providing a very consistent and repeatable experience. 
 
Load material into the heater 
Press the fire button twice to activate session mode 
When your concentrate starts to bubble begin using gently with the carb cap left off 
When the Core 2.0 base vibrates place the carb cap back on and continue your use as you normally would 
For subsequent sessions just use as desired, when the flavor leaves your material, the vapor becomes harsh or stops being produces press the fire button once more to cancel the session 
If you still have material left inside at the end of the session simple hit the fire button twice again and start using immediately, no need to wait for the vibrate as your heater will already be close to adequate temperature. The second session will always run a little hotter than the first if it is started straight after 
Hot Starts –  This way allows the heater to reach full temperature for any given setting; so this method is best for getting the maximum cloud production and effects as quickly as possible. 
 
Press the power button twice to activate session mode 
Load your material onto your dab tool – rice size 
Wait for the Core 2.0 base to vibrate indicating the session temperature has been reached 

While using gently load the dab into the heater, then replace the carb cap and use as your normally would

For subsequent sessions you can carry on as desired. The same applies here with regard to finishing your session. If your material is finished hit the fire button once to cancel the session early, if you still have material left simply hit it twice when the session has ended to start it again! 

As with cold starts, follow up sessions will always run a little hotter. 
Manual – Self explanatory, load a small rice size dab into the heater and hold down the power button. Use as desired. 
 
Manual hold can also be used instead of double pressing to finish a session or heat the heater for easier cleaning. 
 
 
 
Cleaning 
 
Wipe out heater with a Q-tip after each use 
Clean the area around the RDA heater weekly to stop residue building up 
Every month or so wipe out the airway with a Q-tip soaked in ISO – allow to fully dry before use 
Replace bubbler water daily 
To clean bubbler fill with hot water and shake to remove large residues. Soak in ISO to fully clean. Rinse thoroughly with warm water after soaking. 
 
 
Safety Features 
 
Over-charge 
Over-discharge/Low battery 
Over-heat 
Low heater resistance 
Short-circuit 
No atomizer 
 
 
Certifications 
 
CE Certified 
ROHS Certified Materials 
FCC Certification 
FDA Approved Silicone 
UN 38.3 Certified Li-Ion Battery Pack. 
Warning Lights – When your Core 2.0 base flashes three times it’s trying to tell you something… 
 
Blue – Short-circuit warning 
Green – No atomizer warning 
White – Over-heat warning 
Red – Low battery warning 
  
Warranty information 
 
For all warranty claims please contact the store you purchased from. 
The Core 2.0 power base is covered by a one year manufacturer warranty against defects. 
The Core 2.0 carry case is covered by a one year manufacturer warranty against defects. 
The atomizer is covered by a one week manufacturer warranty against defects. 
While atomizers are expected to last much longer than one week, they can be damaged by mishandling and misuse. We understand that not everyone will use the device daily or immediately so offer a one week warranty, from the date of delivery, to report any issue with your atomizer. 

Discount E-Nails

Discount E-Nails products