A Large Variety of Desktop E-Nail Kits, Portable E-Nails, Quartz Nails, Titanium Nails, and Accessories. One Year Warranty, Ships in 24 Hours. 710 your life!

Discount E-Nails

Dabbing

Vaping

Smoking

Bomb Pro Portable Electric E-Rig

Bomb Pro E-rig is designed for dab enthusiasts. The led display shows the Precise Temperature from 400 -700 ℉ in real time. Colorful pulsing and glowing light strips, responding to your every dab. Make your way of dabbing easier with one button control.
Rips are ripping no matter what the temperature is; unique memory function can remember your favorite temperature mode, click 3 times quickly to enter the temperature adjustment mode and set the temperature you want, this will be the temperature limit in your dabbing process, so as to ensure the flavor you want most.
Fits perfectly in your hand, enjoy this device everywhere, perfect for daily dabbing enthusiasts.
If you are the first time to use Bomb pro electric dab rig, no need to worry, easy solid feel to it. You will be Obsessed with the device, definitely give you huge clouds and best flavor.
Cleaning up is a breeze – both the glass and atomizer are removable. The ceramic coil is easily cleaned with cotton swabs, ensure a hassle-free routine for your next happy session.
The glass bubbler can be interchanged with any Puffco Peak glass models!
Add the extra atomizer option to save!
What's Included
Bomb Pro Device * 1
Bomb Pro Atomizer * 1
Dab Tool * 1
USB-C Cable * 1
Cotton Swab
Filling Tool * 1
Bomb Protection & Warranty
The Bomb Pro is covered for 90 days under the Bomb warranty.

Bomb Pro Portable Electric E-Rig

Crossing Core 2.0 | 2.1 Curved Hanger Glass Bubbler E-Rig Kit
Features a curved glass neck for a relaxed session

Model Choice: 2.0 or 2.1

The one you've been waiting for... Core 2.0 e-rig with a black silicone sleeve and carb tether, 4-port spinner carb cap and V5 Heater!!
When heater housing design and art combines! Meet the new rebuildable ceramic coil for the Core 2.0 E-Rig. The RDA V5 Ceramic Heater works on the original Core also. The original Core coil atomizers work on the Core 2.0 too!
 
There are a some key differences between the Core and Core 2.0 e-rigs which are as follows:

Core 2.0 runs V5 heaters, no wire based coils
Atomizers contain only Metal and Ceramic, silicone and PEEK has been replaced with an all ceramic design
Four heat settings are now all for the V5 heaters
Fully rebuildable atomizers – no need to replace the whole housing, just the heater
Decreased pre-heat time
Increased session time
Increased total run time (80 second full run time)
Vortex airflow – included spinner carb cap
“Unbreakable” aluminum carb cap replaces glass bubble carb
Improved button function
Upgraded Stainless Steel Carb Cap Tube


Features

One button functionality for ease of use
Fully heated high polish ceramic vaping surface – elements inside base and walls of heater
Rebuildable atomizer
Vortex Airflow – Aluminum spinner carb cap with carb cap tether
Borosilicate Glass Bubbler
Stainless Steel Carb Cap Tube
Four carefully tuned heat settings
Isolated Aluminum and Glass Vapor Pathway
Low maintenance
Approx. 1 hour 45 minute charging time
3150mah Li-Ion Battery Pack.


What’s Included

Core 2.0|2.1 E-rig Base
Curved Hanger Glass Bubbler
Factory Travel Glass Bubbler
Aluminum Spinner Carb Cap (based on our design)
Carb Cap Tether (black)
Silicone Base Cover/Sleeve (black)
Atomizer with V5 heater installed
Spare V5 Heater
SS316 Dab Tool (based on our design)
4 x Spare Atomizer Screws
Screwdriver
2 x Spare Carb Cap Tube O-rings
1 x Wall Plug
1 x USB-C Charging Cable
Cotton buds/Q-tips
Alcohol wipes
Carrying Case


Button Functions

Hold – Manual fire up to 60 seconds
Two clicks – Activate session mode – One click to cancel
Three Clicks – Change heat setting
Four Click – Display power level – Red/Low – White/Medium – Green/Full
Five Clicks – Lock or unlock Core 2.0 Base


Sessions times and temperatures

The total session time for the Core 2.0 has been upgraded to 80 seconds, this includes the pre-heat time.

Blue – 12.5 second pre-heat – Approx. 400°
Green – 13 second pre-heat – Approx. 425°
White – 17.5 second pre-heat – Approx. 465°
Red – 22.5 second pre-heat – Approx. 500°


Setup

Charge your base using the provided wall plug and cable.
Fill the bubbler from the top, when it is removed from the base. Ensure any excess liquid has been wiped away and that no water has flooded into the bottom compartment. If this happens turn the bubbler upside down and blow into the air hole at the bottom to clear this section. Then re-fill from the top.

Place bubbler onto Core 2.0 Base at an angle, ensuring that the hole in the bubbler base aligns with the vapor pathway in the Core 2.0 base, then gently and firmly push it straight down into place.

Check small screws in the atomizer base which hold the heater legs are done up fully. These need to be tightened so they are firm, but not so much that they cut the wire legs off the heater. When this is done screw the atomizer into the Core 2.0 base.

Place the carb cap tube on the base so that the wider angled side sits at the top, leaving the carp cab on the tether so that you can load concentrate onto the heater.
Select your desired heat setting (start low if you’re not sure).

Now that’s all done we get onto the vaping methods as there are different ways the Core 2.0 can be used!


Methods of Use

Cold Starts – This method is best for getting the most flavor and material preservation as you start using as soon as vapor is being produced. Using it in this way will cause the session temperatures to be slightly lower than otherwise because the air passing around the heater will decrease heating speed. You can start your session at any point, we suggest keeping an eye on the button flashes so that you can always begin after a set number of flashes, if desired, providing a very consistent and repeatable experience.

Load material into the heater
Press the fire button twice to activate session mode
When your concentrate starts to bubble begin using gently with the carb cap left off
When the Core 2.0 base vibrates place the carb cap back on and continue your use as you normally would
For subsequent sessions just use as desired, when the flavor leaves your material, the vapor becomes harsh or stops being produces press the fire button once more to cancel the session
If you still have material left inside at the end of the session simple hit the fire button twice again and start using immediately, no need to wait for the vibrate as your heater will already be close to adequate temperature. The second session will always run a little hotter than the first if it is started straight after
Hot Starts –  This way allows the heater to reach full temperature for any given setting; so this method is best for getting the maximum cloud production and effects as quickly as possible.

Press the power button twice to activate session mode
Load your material onto your dab tool – rice size
Wait for the Core 2.0 base to vibrate indicating the session temperature has been reached

While using gently load the dab into the heater, then replace the carb cap and use as your normally would

For subsequent sessions you can carry on as desired. The same applies here with regard to finishing your session. If your material is finished hit the fire button once to cancel the session early, if you still have material left simply hit it twice when the session has ended to start it again!

As with cold starts, follow up sessions will always run a little hotter.
Manual – Self explanatory, load a small rice size dab into the heater and hold down the power button. Use as desired.

Manual hold can also be used instead of double pressing to finish a session or heat the heater for easier cleaning.



Cleaning

Wipe out heater with a Q-tip after each use
Clean the area around the RDA heater weekly to stop residue building up
Every month or so wipe out the airway with a Q-tip soaked in ISO – allow to fully dry before use
Replace bubbler water daily
To clean bubbler fill with hot water and shake to remove large residues. Soak in ISO to fully clean. Rinse thoroughly with warm water after soaking.


Safety Features

Over-charge
Over-discharge/Low battery
Over-heat
Low heater resistance
Short-circuit
No atomizer


Certifications

CE Certified
ROHS Certified Materials
FCC Certification
FDA Approved Silicone
UN 38.3 Certified Li-Ion Battery Pack.
Warning Lights – When your Core 2.0 base flashes three times it’s trying to tell you something…

Blue – Short-circuit warning
Green – No atomizer warning
White – Over-heat warning
Red – Low battery warning
 
Warranty information

For all warranty claims please contact the store you purchased from.
The Core 2.0 power base is covered by a one year manufacturer warranty against defects.
The Core 2.0 carry case is covered by a one year manufacturer warranty against defects.
The atomizer is covered by a one week manufacturer warranty against defects.
While atomizers are expected to last much longer than one week, they can be damaged by mishandling and misuse. We understand that not everyone will use the device daily or immediately so offer a one week warranty, from the date of delivery, to report any issue with your atomizer.



Crossing Core 2.0 | 2.1 Curved Hanger Glass Bubbler E-Rig Kit

Crossing Core XL Kit
THE BRAND NEW CROSSING TECH CORE XL VAPORIZER IS HERE! A newly updated base with 6 heat settings, new XL atomizer, and new Grenade Glass bubbler!

The Core has been updated, to it's core! The new eRig has a brand new power base with 6 heat settings, a new high-flow glass percolator, and is fitted with the 3D XL atomizer! The carb cap and holder have also been modified for the new device. 

The Core XL E-rig is the latest portable e-rig from SZ Crossing A.K.A. CrossingTech. It is an all in one dab rig designed for use with a full range of concentrates, from thin oils to solid shatter style material. With a solid build made from high quality materials, a fully heated large capacity cup, vortex airflow and everything you need to get started (except concentrates) it provides the best entry level e-rig experience. After a little practice it rivals much more expensive devices! 

Atomizer Choices:
-Core XL with Non-Rebuildable Heater
With these you can replace the whole atomizer, the heater is fixed inside. They have been made since some people have no desire to replace heaters in housings so this more convenient solution exists

-Core XL with Rebuildable Heater
With these you can replace the ceramic heaters, ceramic spacers, and screws. This is a better option for technical individuals that like to tear down and rebuild their atomizers for a more hands on approach. 


Features

Core XL runs XL 3D Ceramic heaters only, no wire based coils
Atomizers contain only Metal and Ceramic, silicone and PEEK has been replaced with an all ceramic design
Six Heat settings
Increased total session time (80 second full run time)
Vortex airflow - included updated spinner carb cap
"Unbreakable" aluminium carb cap 
Improved button function
Upgraded Stainless Steel Carb Cap Tube
One button functionality for ease of use
Fully heated high polish ceramic vaping surface - elements inside base and walls of heater
Rebuildable or non-rebuildable atomizer options 
Borosilicate Glass Bubbler Grenade Bubbler - an upgrade over previous Core bubblers 
Updated Stainless Steel Carb Cap Tube and heat dissipator
Isolated Anodized Aluminium and Glass Vapor Pathway
Low maintenance 
Approx. 1 hour 45 minute charging time
3150mah Li-Ion Battery Pack
Approx. 21 full sessions - mixed power settings 
 

What's Included

Core XL E-rig Base with six heat settings
Core Grenade bubbler with better function and angled mouthpiece
Aluminum Spinner Carb Cap
Carb Cap Tether (black)
Silicone Base Cover/Sleeve (black)
Core XL 3D Ceramic Atomizer
SS316 Dab Tool
2 x Spare Carb Cap Tube O-rings
1 x USB-C Charging Cable
Cotton buds/Q-tips
Alcohol wipes 
Carry Case
 

Button Function

Two clicks - Activate session mode - One click to cancel
One Clicks - Change heat setting 
Four Click - Display power level - Red/Low - White/Medium - Green/Full
Five Clicks - Lock or unlock device
 

Sessions times and temperatures

The total session time for the Core XL has been upgraded to 80 seconds, this includes the pre-heat time. It now has 6 heat settings, click once to cycle through these. 

Purple / Lowest - 320f after preheat 
Yellow / Second lowest - 330f after preheat 
Blue / Middle - 350f after preheat
Green / Middle high - 395f after preheat
White / Second highest - 450f after preheat
Red / Highest - 500f after preheat
 

Setup

Always hold your e-rig upright! If you angle it during use concentrate will spill out the bucket! Now that's out the way...
Charge your base using the provided wall plug and cable. 
Fill the bubbler from the top, when it is removed from the base. Ensure any excess liquid has been wiped away and that no water has flooded into the bottom compartment. If this happens turn the bubbler upside down and blow into the air hole at the bottom to clear this section. Then re-fill from the top. 
Do not fill the bubbler past 1/4 fill height or you risk flooding the base and damaging the unit. Just above the airflow slits inside is fine.
When replacing the bubbler, place it on the base at an angle, ensuring that the hole in the bubbler base aligns with the vapor pathway, then gently and firmly push it straight down into place. 
For Rebuldable Atomizer check the small screws in the atomizer base which hold the heater legs are done up fully. These need to be tightened so they are firm, but not so much that they cut the wire legs off the heater. 
Select your desired heat setting (start low if you're not sure).
 

Vaping methods

Cold Starts - This method is best for getting the most flavour and material preservation as you start inhaling as soon as vapour is being produced. Vaping in this way will cause the session temperatures to be slightly lower than otherwise because the air passing around the heater will decrease heating speed.  You can start your inhale at any point, we suggest keeping an eye on the button flashes so that you can always begin inhaling after a set number of flashes, if desired, providing a very consistent and repeatable experience. 

Load a rice grain size dab (basmati not long grain) into the heater
Press the fire button twice to activate session mode
When your concentrate starts to bubble begin inhaling gently with the carb cap left off
When the Core 2.0 base vibrates place the carb cap back on and continue your inhale as you normally would
For subsequent inhalations just inhale as desired, when the flavour leaves your material, the vapor becomes harsh or stops being produces press the fire button once more to cancel the session
If you still have material left inside at the end of the session simple hit the fire button twice again and start vaping immediately, no need to wait for the vibrate as your heater will already be close to vaping temperature. The second session will always run a little hotter than the first if it is started straight after
It's been advised by the manufacturer to avoid doing hot starts where the dab is loaded into a pre-heated heater as this can crack the ceramic due to the temperature difference
Manual - Self explanatory, load a small rice size dab into the heater and hold down the power button. Inhale as desired. 

Manual hold can also be used instead of double pressing to finish a session or heat the heater for easier cleaning. 

 

Cleaning

Wipe out heater with a q-tip after each use
Clean the area around the atomizer weekly to stop residue building up
Every month or so wipe out the airway with a q-tip soaked in ISO - allow to fully dry before use
Replace bubbler water daily
To clean bubbler fill with hot water and shake to remove large residues. Soak in ISO to fully clean. Rinse thoroughly with warm water after soaking.  
The Core Atomizer can also be removed and screwed into a heat sink on our Pico Plus with auto-fire or an Arctic Fox or DNA-C box mod (with auto-fire), then run at 36W upside down for 1-2 mins to perform a burn off cycle to clean the heater back to new. This is optional. You can also use the CUB instead of a heat sink with this setup, the CUB can also be used with the atomizers as a standalone portable when paired with a box mod such as the Pico Plus. 
 

Safety Features 

Over-charge 
Over-discharge/Low battery
Over-heat 
Low heater resistance
Short-circuit 
No atomizer 
 

Certifications

CE Certified
ROHS Certified Materials
FCC Certification
FDA Approved Silicone
UN 38.3 Certified Li-Ion Battery Pack. 
 

Warning Lights - When your Core 2.0 base flashes three times it's trying to tell you something...

Blue - Short-circuit warning
Green - No atomizer warning
White - Over-heat warning
Red - Low battery warning
 

Warranty information

For all warranty claims please contact the store you purchased from.
The Core XL power base is covered by a one year manufacturer warranty against defects.
The atomizer is covered by a one week manufacturer warranty against defects, this can be damaged by aggressive cleaning or accidental damage from tools.
While atomizers are expected to last much longer than one week, they can be damaged by mishandling and misuse. We understand that not everyone will use the device daily or immediately so offer a one week warranty, from the date of delivery, to report any issue with your atomizer.

Note: older coils and RDAs from the Core and Core2 will work on the new Core XL.



Crossing Core XL Kit

Focus V Carta Sport
The CARTA SPORT introduces a fresh aesthetic with one-button simplicity, perfect for quick, on-the-go sessions. It supports the full line of INTELLI-CORE® atomizers and debuts the all-new CARTA CONNECT, a removable silicone airpath that makes cleaning effortless and opens up a new world of compatibility and customization.

-UP TO 50 DABS PER CHARGE
-CARTA CONNECT
-CONTROL STICK
-INTELLI-CORE® COMPATIBLE
-CARTA GLASS COMPATIBLE
-BLUETOOTH ENABLED
-V REWARDS

WHAT'S INCLUDED:

Water resistant Carrying Case with Shoulder Strap, Silicone Stopper, Loading Tool, Cleaning Swabs, Cleaning Wipes and Owners Manual.

Description
Focus V CARTA Sport
The CARTA Sport is Focus V’s new version of the CARTA Classic. This new electric dab rig has great new accessories. This includes the CARTA Connect and a Control Stick. It also comes with a bigger battery and a Black CARTA Glass Top.

The new, removable CARTA Connect is an air path system that enhances the airflow when you inhale. It fixes reclaim issues to help you get the most from your product. It also makes cleaning your device easier as it is completely removable. We have attached a photo below for reference. 

The air path (CARTA Connect) is removable for simple cleaning. You can put it in the freezer for 10 minutes and use the Loading Tool to scrape off any leftover concentrates.

The Sport also has a new Control Stick. It includes a carb cap for better airflow and taste.

This design heats the product better than before. They make the stick from strong glass and add textured silicone for a better grip. The Control Stick works with all Intelli-Core atomizers and all tethers.

The CARTA Sport has one button, so you don’t need an OLED screen. The battery is also 35% bigger than the CARTA 2 for more dabs per hour. The software now has a longer battery life of up to 50 days per charge. 

Features
Bluetooth enabled
Fully compatible with Intelli-Core atomizers (including MAX)
Compatible with CARTA Glass
Up to 50 dabs per charge
Redeemable V Rewards
Control Stick
CARTA Connect
Comfortable grip
Black glass top
35% larger battery than CARTA 2
Up to 50 dabs per charge
Adjustable presets
Low Power Mode
Includes
1x CARTA Sport Device
1x Intelli-Core Standard Atomizer
1x Owners Manual
1x Black CARTA Glass top
1x Silicone Stopper
Cleaning Wipes
Cleaning Swabs
1x Loading Tool
1x Water Resistant Carrying Case with Strap

Quick Start
Download the Focus V app ‘V Browser’ for custom control.
Click the button 5 times to turn on/off
The device will vibrate, letting you know it is on/off
Double click to start the session
Double click to extend the session by 10 seconds
Single click to end the session
LED will change to orange when heating
Three clicks to cycle through the 5 presets
One click to see which preset you have selected
The LED color will change based on the preset you select 
Four clicks will show you the battery light/level
Click four times and hold the fourth click down to enable Low Power Mode


Blue LED: 480°F
Yellow LED: 495°F
Green LED: 515°F
Purple LED: 535°F
Red LED: 565°F


Always read the user manual for proper use and upkeep

Helpful Resources
How to Use CARTA Sport
Download the V Browser App
Product Registration
Tech Specs
Power Supply    Built-in Battery
Battery Life    50 Dabs per Charge
Heat Time    30 Seconds
Heat Style    Conduction
Temperature    480°F – 565 °F
Use With    Concentrates or Dry Herb
Warranty    1 Year with Focus V
Weight    454g
Connectivity     Bluetooth
Compatible With    CARTA Glass, Intelli-Core Atomizers

Focus V Carta Sport

Crossing Core 3D XL Joystick Kit

THE BRAND NEW CROSSING TECH CORE XL VAPORIZER IS HERE! A newly updated base with 6 heat settings, new XL atomizer, and new Grenade Glass bubbler!

The Core has been updated, to it's core! The new eRig has a brand new power base with 6 heat settings, a new high-flow glass percolator, and is fitted with the 3D XL atomizer! The carb cap has been updated to a joystick style housing.

The Core XL E-rig is the latest portable e-rig from SZ Crossing A.K.A. CrossingTech. It is an all in one dab rig designed for use with a full range of concentrates, from thin oils to solid shatter style material. With a solid build made from high quality materials, a fully heated large capacity cup, vortex airflow and everything you need to get started (except concentrates) it provides the best entry level e-rig experience. After a little practice it rivals much more expensive devices! 


Core XL with Non-Rebuildable Heater
With these you can replace the whole atomizer, the heater is fixed inside. They have been made since some people have no desire to replace heaters in housings so this more convenient solution exists

Joystick Carb Cap

Never stuck. Less maintenance. Always fun. The Core XL Joystick Cap provides precise 360o directional airflow for more consistent heating, giving you bigger clouds and better flavor. Made of shatterproof stainless steel and silicone, the Joystick’s design is easy to clean and prevents reclaim from stopping your flow. And it’s fidget friendly.


Features

Core XL runs XL 3D Ceramic heaters only, no wire based coils
Atomizers contain only Metal and Ceramic, silicone and PEEK has been replaced with an all ceramic design
Six Heat settings
Increased total session time (80 second full run time)
Vortex airflow - included updated spinner carb cap
360 Degree Joystick Carb Cap
Improved button function
Upgraded Carb Cap housing
One button functionality for ease of use
Fully heated high polish ceramic vaping surface - elements inside base and walls of heater
Rebuildable or non-rebuildable atomizer options 
Borosilicate Glass Bubbler Grenade Bubbler - an upgrade over previous Core bubblers 
Updated Stainless Steel Carb Cap Tube and heat dissipator
Isolated Anodized Aluminium and Glass Vapor Pathway
Low maintenance 
Approx. 1 hour 45 minute charging time
3150mah Li-Ion Battery Pack
Approx. 21 full sessions - mixed power settings 
 

What's Included

Core XL E-rig Base with six heat settings
Core Grenade bubbler with better function and angled mouthpiece
Joystick Carb Cap and Housing
Silicone Base Cover/Sleeve (black)
Core XL 3D Ceramic Atomizer
SS316 Dab Tool
2 x Spare Carb Cap Tube O-rings
1 x USB-C Charging Cable
Cotton buds/Q-tips
Alcohol wipes 
Carry Case
 

Button Function

Two clicks - Activate session mode - One click to cancel
One Clicks - Change heat setting 
Four Click - Display power level - Red/Low - White/Medium - Green/Full
Five Clicks - Lock or unlock device
 

Sessions times and temperatures

The total session time for the Core XL has been upgraded to 80 seconds, this includes the pre-heat time. It now has 6 heat settings, click once to cycle through these. 

Purple / Lowest - 320f after preheat 
Yellow / Second lowest - 330f after preheat 
Blue / Middle - 350f after preheat
Green / Middle high - 395f after preheat
White / Second highest - 450f after preheat
Red / Highest - 500f after preheat
 

Setup

Always hold your e-rig upright! If you angle it during use concentrate will spill out the bucket! Now that's out the way...
Charge your base using the provided wall plug and cable. 
Fill the bubbler from the top, when it is removed from the base. Ensure any excess liquid has been wiped away and that no water has flooded into the bottom compartment. If this happens turn the bubbler upside down and blow into the air hole at the bottom to clear this section. Then re-fill from the top. 
Do not fill the bubbler past 1/4 fill height or you risk flooding the base and damaging the unit. Just above the airflow slits inside is fine.
When replacing the bubbler, place it on the base at an angle, ensuring that the hole in the bubbler base aligns with the vapor pathway, then gently and firmly push it straight down into place. 
For Rebuldable Atomizer check the small screws in the atomizer base which hold the heater legs are done up fully. These need to be tightened so they are firm, but not so much that they cut the wire legs off the heater. 
Select your desired heat setting (start low if you're not sure).
 

Vaping methods

Cold Starts - This method is best for getting the most flavour and material preservation as you start inhaling as soon as vapour is being produced. Vaping in this way will cause the session temperatures to be slightly lower than otherwise because the air passing around the heater will decrease heating speed.  You can start your inhale at any point, we suggest keeping an eye on the button flashes so that you can always begin inhaling after a set number of flashes, if desired, providing a very consistent and repeatable experience. 

Load a rice grain size dab (basmati not long grain) into the heater
Press the fire button twice to activate session mode
When your concentrate starts to bubble begin inhaling gently with the carb cap left off
When the Core 2.0 base vibrates place the carb cap back on and continue your inhale as you normally would
For subsequent inhalations just inhale as desired, when the flavour leaves your material, the vapor becomes harsh or stops being produces press the fire button once more to cancel the session
If you still have material left inside at the end of the session simple hit the fire button twice again and start vaping immediately, no need to wait for the vibrate as your heater will already be close to vaping temperature. The second session will always run a little hotter than the first if it is started straight after
It's been advised by the manufacturer to avoid doing hot starts where the dab is loaded into a pre-heated heater as this can crack the ceramic due to the temperature difference
Manual - Self explanatory, load a small rice size dab into the heater and hold down the power button. Inhale as desired. 

Manual hold can also be used instead of double pressing to finish a session or heat the heater for easier cleaning. 

 

Cleaning

Wipe out heater with a q-tip after each use
Clean the area around the atomizer weekly to stop residue building up
Every month or so wipe out the airway with a q-tip soaked in ISO - allow to fully dry before use
Replace bubbler water daily
To clean bubbler fill with hot water and shake to remove large residues. Soak in ISO to fully clean. Rinse thoroughly with warm water after soaking.  
The Core Atomizer can also be removed and screwed into a heat sink on our Pico Plus with auto-fire or an Arctic Fox or DNA-C box mod (with auto-fire), then run at 36W upside down for 1-2 mins to perform a burn off cycle to clean the heater back to new. This is optional. You can also use the CUB instead of a heat sink with this setup, the CUB can also be used with the atomizers as a standalone portable when paired with a box mod such as the Pico Plus. 
 

Safety Features 

Over-charge 
Over-discharge/Low battery
Over-heat 
Low heater resistance
Short-circuit 
No atomizer 
 

Certifications

CE Certified
ROHS Certified Materials
FCC Certification
FDA Approved Silicone
UN 38.3 Certified Li-Ion Battery Pack. 
 

Warning Lights - When your Core 2.0 base flashes three times it's trying to tell you something...

Blue - Short-circuit warning
Green - No atomizer warning
White - Over-heat warning
Red - Low battery warning
 

Warranty information

For all warranty claims please contact the store you purchased from.
The Core XL power base is covered by a one year manufacturer warranty against defects.
The atomizer is covered by a one week manufacturer warranty against defects, this can be damaged by aggressive cleaning or accidental damage from tools.
While atomizers are expected to last much longer than one week, they can be damaged by mishandling and misuse. We understand that not everyone will use the device daily or immediately so offer a one week warranty, from the date of delivery, to report any issue with your atomizer.

Note: older coils and RDAs from the Core and Core2 will work on the new Core XL.

Crossing Core 3D XL Joystick Kit

Quartz/Titanium Hybrid Nail With Dish
Grade 2 Factory Certified Titanium

Coil Size Choice: 20mm/16mm/10mm
Fitment: 6 in 1
Configures to fit 10mm/14mm/18mm Male and Female Rigs
(Fits almost all rigs)

Includes:
1x Hybrid Nail
1x 25mm Quartz Dish

https://discountenails.com/

Quartz Hybrid Nail

Tornado Buoy Base Cyclone Percolator

 
Size: 10.8 Inches Tall
Joint Type: 18mm Female
Included Accessories: Glass Nail (for torches)

https://discountenails.com/

SB Tornado Buoy Base Cyclone Percolator

Greenlightvapes G9 Mini H-Enail 2.0 Kit

The G9 Mini H-enail 2.0 is a smaller version of our classic H-enail.

No coil,power cable,torch,or butane is necessary to dab.

The Mini H-enail is a portable,rechargeable,battery powered dabbing device,

featuring a ceramic heating base and 3 temperature settings.

Each Mini H-enail includes a titanium,ceramic,and quartz nail to give you optimal flavor each time.

Glass fittings:Silicone rings
Battery capacity: 18500/1500mAh
Charging port: 2 mm round USB port
Charging time:2 hours number of heating cycles on complete charge.

Kit Includes:

1*G9 Mini Henail with non-removable lithiumion battery.

1*Glass pipe attachment.

1*Magnetic stainless steel dabber/carb cap.

1*Replacement ceramic nail.

1*Replacement quartz nail.

1*2.0 Round USB charger.

1*Mini Henail manual.

1*Warranty service card.

1*Cardboard gift box.

Key Features:
- Interchangeable Ceramic Base
- Three Different XL Nails 
- 3 Temperature Settings
- Long Lasting 1500mAh Battery
- Small & Portable

Q&A
1. How hot does the dish get?
The dish can heat up to 980°F on the max setting, and reaches the target temperature in under 30 seconds.
 
2. How many uses can the Henail handle off a single charge?
The Henail can handle 45-50 hits off a full charge.
 
3. Can you set temperatures?
Yes, Henail can be put on 3 different heating temperatures.
 
4. How long does it take to charge?
It can take about 2 hours for a full battery charge.
 
5. Can I replace the heating dish?
Yes, all the nails are repalceable
 
6. How long is the warranty and what does it cover?
1-year warranty on all electrical components. 
 
7. What happens if the glass breaks?
Our warranty only covers electrical components.
 
8. What do I do if the holes get clogged in the glass?
You can run it under warm water/soak glass in alcohol and the holes will unclog

https://discountenails.com/

Greenlightvapes G9 Mini H-enail Kit 2.0

Greenlightvapes G9 Mini Portable H-enail Kit 2.0 Colors: Black, Blue Silver

Fancier E-Nail Controller Basic Kit

 
The PID E-Nail controller box controls the hot runner heating coil. The coil will heat from room temperature to 710 Degrees in about 3 minutes. The temperature range is 0-999 degrees. The Coil is rated at 100W under 110VAC. The heating coil is 59 inches in length with a black and yellow fire retardant sheath cover.

 
Coil size choice: 10mm Flat, 16mm, 20mm, 25mm

 
Kit Includes:
1x PID Temperature Controller Box
1x Heating Coil
1x Power Chord
1x User Manual

 
Fancier E-Nail Features:
Brand Name 	Fancier
Key Words 	Fancier Nail, Fancier E Nail, Fancier Nail
Voltage 	AC110V -240V 50-60HZ
Temperature Range 	Room Temperature~999 Degrees °F
Temperature stability 	Approximately 5°F-7°F
Wattage 	110W
Coil Shape 	Barrel (Spiral) 
Length of coil 	1.5 Meter (5ft) Kevlar Fireproof Sheath
Thermocouple Type 	“K” type
PID Dimension/unit 	  3.5 x 1.5 x 5.0 inch (93x37x129mm)

https://discountenails.com/

Fancier Basic E-Nail Controller Box Kit

Fancier E-Nail Controller Box Kit Provides the Basics for Customers That Already Have a Nail and Rig/Dab Accessories

Quartz Banger Nail

 
Fits 19.8/20mm inner diameter heating coils. Factory certified quartz.
The nail fitment is 14/18mm male for rig joint size
-Arm/Rest/Holder for coil

 
Includes:
1x Quartz Banger Nail

https://discountenails.com/

Quartz Banger Nail 14/18mm

Quartz Banger Nail 14/18mm. Fits 19.8/20mm inner diameter heating coils. Factory certified quartz. 

Fancier Quartz & Titanium E-Nail Kit

Universe Design Collection Choices:

Northern Lights, Galaxy, White Honeycomb, Gold
Nail Options:
Nail Choice: Titanium, Quartz Hybrid, Quartz Banger, Straight Quartz Nail
(choose one above)
The PID E-Nail controller box controls the hot runner heating coil. The controller will heat from room temperature to 710 degrees in 3-4 minutes. Temperature Range is 0-999 Degrees.
The coil is rated at 100W under 110VAC. It is a barrel shaped coil with 19.8mm inner diameter size and 20mm outer size. The heating coil is 59 inches in length with a black and yellow fire retardant sheath.
Please refer to the included user manual before operating.
The quartz nail bottoms are 14/18mm male rig joints. The kit comes with a 14/18mm female adapter. This makes both quartz nails a 4 in 1 fitment, which will fit most all rigs male and female.
The titanium nail bottoms are reversible for a 6 in 1 10mm/14mm/18mm male and female rig fitment.
They fit most all rig joints!

 
Kit Includes:
1x PID Temperature Controller Box
1x Heating Coil (choose size above)
1x Power Cable
1x Nail (choose nail above)
1x Carb Cap (matches nail choice)
1x 14/18mm Female Adapter (only for the quartz choice)
1x Black Carbon Fiber Design Case
1x Dab Mat
2x Silicon Jars (random color)
1x User Manual

Fancier E-Nail Features:
Brand Name 	Fancier
Key Words 	Fancier Nail, Fancier E Nail, Fancier Nail
Voltage 	AC110V -240V 50-60HZ
Temperature Range 	Room Temperature~999 Degrees °F
Temperature stability 	Approximately 5°F-7°F
Quartz Nail with Adapter Joints: 	14MM Male, 18MM Male, 14MM Female, 18MM Female Joints 4 in 1
Coil Shape 	Barrel (Spiral) 
Length of coil 	1.5 Meter (5ft) Kevlar Fireproof Sheath
Thermocouple Type 	“K” type
PID Dimension/unit 	  3.5 x 1.5 x 5.0 inch (93x37x129mm)

https://discountenails.com/

Universe Design Collection E-Nail Controller Kit

Introducing Our New Universe Collection Design E-Nail Controller Kits. Nail Choices Are: Quartz Banger, Straight Quartz, Titanium, Quartz/Titanium Hybrid.

Kanboro Ecube Master 2 Kit
The Ecube Master 2 is the newest released flagship portable e-nail kit from Kanboro Tech. They took what they had learned from manufacturing e-nails for other popular brands and added some clever innovations of their own. The main feature and difference from the Ecube Master is the sleek new body design with the "bolt" button. Also it features a 1 piece glass mouthpiece with no joints. The LED screen has also been upgraded. The Ecube uses a 4mm removable and replaceable ceramic heating rod that connects via 2 gold plated pins to ensure a good connection.  Another difference from most other E-Nails out there is the larger size of the nail itself.  The unit comes with a titanium, a ceramic, and a quartz nail ranging in size from 14.5 mm to 16 mm in diameter.
Features:

- Full Ceramic Top

- Plug-in Replaceable Heating Rods

- Replaceable Nails

- Battery Lasts Up To 45 Uses

- Heats Up In 30 Seconds

-LED screen

- Temp Range 200-900℉

- Extremely Portable

- All-in-one dab set up, easy for the average starter

 
Includes:

1x Explosive/Water-proof Case

1x Ecube Master 2 Body

1x Kanboro Silicon Container

1x Magnetic Carb Cap with Tool

1x Glass Attachment

1x 18650 battery

2x heating rods

1x Ceramic Nail 16mm

1x Ti-Nail 14.5mm

1x Quartz Nail 16mm

1x Magnetic Stand

1x Replacement O-Rings

1x USB Charging Cable

1x User`s Manual

https://discountenails.com/

Kanboro Tech Ecube Master 2

Kanboro Tech Ecube Master 2 Portable E-Nail Kit

Features of the Crossing E-nail Kit:

1. Comes with a size 20mm grade 2 titanium nail

(10mm/14mm/18mm male and female rig joint fitment)

2.Auto shut off timer function (you can set the time)

3.Black and Green mini/micro size control box.

4.Heats up only 45 SECONDS to 710 degrees.

5.More convenient, heats up fast.

6.Has a very long operating

life.

How to operate:

-Hold down the middle button for 5 seconds to turn on/off the unit.

-Click - to decrease temperature in increments of 5 degrees Fahrenheit and click + to increase temperature in increments of 5 degrees Fahrenheit.

-Click the middle button 5 times to change the auto shut off time from 0-5 hours.

-0 means no shut off.

-The default shut off time is 2 hours.

-The temperature range is from 220F-990F

 

Includes:

1 Controller Box

1 20mm Coil Size Titanium Nail

(bottom of nail rig fitment: 10mm 14mm 18mm male and female)

1 Carb Cap

1 Charging Cord

1 Power Chord

1 Gift Box

1 User Manual

https://discountenails.com/

Crossing Micro E-Nail Controller Kit

Crossing Micro E-Nail Controller Kit Desktop With Titanium Nail

Greenlightvapes G9 Epro

The EPro from Greenlight Vapes is a premium E-Nail Rig Vaporizer that uses a heavy duty 3000mAh battery with digital display screen, a removable ceramic heater with 3 interchangeable bowl types and an intricate glass water recycler.

It's advanced 3000mAh Lithium-ion battery is easily operated using a user-friendly 3 button interface and the digital screen displays all important information neatly in one place.

You can press the EPro Wax Vaporizer's power button 5 times to turn the battery on. While on the digital display screen will show your battery life, selected bowl type, a session timer, desired temperature and current temperature.

Press the  + / - buttons simultaneously to enter the bowl selection mode. Scroll through the different types using the + / - buttons and then lock in your choice by clicking the power button once. You have three bowl types in each kit (Quartz, Ceramic, Titanium) that can be easily swapped so you always get the exact results you prefer.

Use the - / + buttons to precisely select your desired temperature level in 10° increments anywhere within the range of 280-800°F. With such a wide range to work with you're guaranteed to have the perfect heat setting for any type of concentrated oil you decide to vape.

After you have chosen your temperature level you can click the power button 3 times to start a heating cycle. The EPro Dab Rig will emit an audible beeping tone to indicate it has begun heating. It takes about 30 seconds to reach the desired temperature followed by a long beeping tone. After it reaches your desired temperature it will continue to heat the chamber for 60 more seconds before automatically cutting off it's power.

As you vape your waxy oils the vapor filters through a high quality glass water recycler with multiple chambers that guarantees a smooth vapor that is absolutely packed with clean tasting flavors. You also have a premium quartz glass carb with silicone tether to easily control airflow throughout your session with great precision.

The G9 EPro Concentrate Vaporizer's also comes equipped with a non-stick silicone jar to store your concentrates and a collection of cleaning accessories to keep the device working as it does out of the box for plenty of time to come.

Invest in the EPro Rig Style Concentrate Vaporizer from Greenlight Vapes today and heat your concentrates on the go the right way.

 

Features & Specs

    Premium Concentrate Rig with Digital Display
    100% Authentic Greenlight Vapes Brand Guaranteed
    Dimensions: About 239.2mm Tall (w/ Glass) x 41.5mm Wide (Base)
    Device Weight: About 14.9 ounces
    High Quality Hand-Blow Glass Water Recycler with Multiple Chambers
    Premium Quartz Glass Carb Cap with Silicone Tether
    Uses Removable/Replaceable Ceramic Heater Base
    Includes 3 Interchangeable Bowl Types (Ceramic, Quartz, Titanium)
    Heavy Duty Base with Long-lasting 3000mAh Battery
    Versatile Temp Control Range: 280-800°F (Adjusted in 10° increments)
    Reaches Desired Temperature Level in About 30 Seconds
    Extended 60 Second Heating Duration Cycle
    Digital Screen Displays Temp Settings, Puff Counter, Timer, Battery Life & More
    Ultra Convenient Auditory Notification System
    Easy Micro USB Charging Method with Passthrough
    User-Friendly Three Button Control Interface
    Press Power Button 5 Times to Turn On/Off
    Press Power Button 3 Times to Begin Heating Cycle
    Press + / - Buttons Simultaneously to Select Bowl Type
    Use  + / - Buttons to Select Temperature Setting

     Included:

    1 x G9 EPro Dab Nail Vaporizer
    1 x Removable Ceramic Heater Base
    1 x Handmade Glass Recycler
    1 x Ceramic Bowl
    1 x Titanium Bowl
    1 x Quartz Bowl
    1 x Glass Carb Cap with Tether
    3 x Cotton Swabs
    2 x Alcohol Wipes
    1 x Dab Tool
    1 x Silicone Jar
    1 x USB Charger
    1 x Set of Spare O-Rings

Optional Add On: Epro Silicone Dab Tray/Holder

https://discountenails.com/

Greenlightvapes G9 Epro

The EPro from Greenlight Vapes is a premium E-Nail Rig Vaporizer that uses a heavy duty 3000mAh battery for dabbing. 

SOC Peak Vaporizer Kit

Colors: Black, White, Blue

Features:

    2600mAh Battery
    4 Temperature Settings from 450° F to 600° F
    Sesh Mode: Increase Heat and duration by 15 seconds
    Lightning Warmup & LED Light Indicator
    Micro USB Rechargeable
    Compact 6.25" tall; 3.5" wide and 2.75" deep

Take the best from the Puffco Peak, Kandypens Oura, Dr. Dabber Switch, and put them into a compact, affordable package and you would get this, the SOC E-Nail! The SOC is a portable concentrate e-rig vape capable of heating up to 600° F in under 30 seconds, allowing you to enjoy your essential oils and concentrates without the hassle of breaking out your glass rig and blowtorch. Simply choose from 4 temperature settings, heat it up, and enjoy!

S.O.C. stands for System on Chip, meaning the SOC is run by a smart on-board chip, allowing it to accurately reach and maintain temperatures and overall system settings throughout uses. Just like the Puffco Peak, the SOC uses a ceramic bowl with a ceramic topper for efficient heating and large cloud production. If you're into cloud chasing and love producing huge vapor clouds, the SOC has got you covered!

The SOC is only 6.25" tall making it one of the shortest E Rigs on the market today, and also one of the hottest! With a max temperature of 600° F coupled with a ceramic chamber to ensure maximum vapor, any concentrate or oil you put inside will give you one of the best experiences when you draw it out!
Four Temperature Settings

Low

Med

High

Peak

The SOC features 4 temperature settings, from 450° F to 600° F, in 50° increments. To cycle through the temp settings, click the button three times while the device is not heating up.

    Low (Small Load): 450° F
    Medium (Medium Load): 500° F
    High (Large Load): 550° F
    Peak (XL Load): 600° F

The SOC device features intelligent temperature calibration, which provides a more consistent experience during repeated use. This means that, though the average heat up time is around 30 seconds, actual times may vary.
Checking the SOC's 2600mAh Battery

100% - 75%

75% - 50%

50% - 25%

25% - 0%

While the SOC vape is on, click the power button once at any time to display the remaining battery life. The battery life is indicated by color, and you can fully charge the battery in 2.5 hours.

    100% - 75%
    75% - 50%
    50% - 25%
    25% - 0%

Engaging the SOC Peak "Sesh Mode"

The SOC has got you covered! This awesome vape has a "sesh mode" that increases heat and extends your session by 15 seconds. Use it to boost heat or to share with your friends.

Whether you want to share or if you want more vapor, simply double click when the SOC is at its target temperature to initiate sesh mode. Any time you want to extend it, just tap the button twice again and as often as you need to enjoy everything your concentrate's got!
What's Included with the SOC Vape

Open up the box and you'll find everything packed nicely within a custom-cut foam padding. There are two levels, so once you take out the SOC E-Rig don't forget to take out one layer of foam!

    SOC Base, 2600mAh Li-Ion Battery
    Hand Blown borosilicate Glass Piece
    Removable Atomizer
    3x Ceramic Bowls
    Ceramic Atomizer Cover
    Hand Blown Carb Cap
    Metal Loading Tool
    Silicone Storage Jar
    3x Snappable, Isopropyl Alcohol-filled Cotton Swabs
    USB recharging cable

The SOC is loaded with everything necessary for a good time, and even comes with replacement ceramic bowls.
How to Use Your SOC Portable E-Rig

Interested in learning how to use the SOC before you get it? Check out this Quick Start guide!

    Fully charge device before first use. Device pulses white while charging and turns off automatically when complete.
    With the glass chamber removed from the base, fill glass with water just above the air holes. Do not fill glass while attached to base. If necessary, dry the glass to ensure no water is allowed into the lower section.
    Align inlet hole on the front of the glass with atomizer. Carefully push the front of the glass into the base, then the back.
    To lock / unlock the device, quickly click the power button 5 times.
    Quickly click the button 3 times to select heat settings.

    Blue: 450° F; Green: 500° F; Orange: 550° F; White: 600° F.
    Use the Metal Loading Tool to place contents on the bottom surface of the bowl (not the sides).
    Place carb cap on top of atomizer.
    Hold the button for 3 seconds to initiate heat-up. Pulsing light indicates heat-up mode is active.

    Because the system uses smart technology to adjust the heating based on content the heating time may vary, but the average heating time is around 30 seconds.
    Heating can be canceled at any time by holding the button again.
    When fully heated, the SOC will emit a long beeping tone and the light will flash. Inhale gently for the best results!
    Use a cotton swab to clean the chamber after each use.

Follow these instructions and you will keep your SOC in tip-top shape for years to come.
Cleaning Instructions

Proper cleaning is just as important as enjoying your concentrates. SOC recommends a thorough cleaning every 20 uses and following these simple instructions will help you keep your device working like new all throughout its life. These same instructions are inside the manual.

    Ensure everything has cooled before starting.
    Remove the Glass Chamber before unscrewing or re-inserting the atomizer.
    Clean carb cap and glass by soaking in isopropyl alcohol. Rinse clean with water after.
    Atomizer can be cleaned with isopropyl alcohol fully assembled or disassembled (all ceramic pieces removed; see instructions for detailed view). Be sure to clean gold connector on base and bottom of atomizer with an alcohol soaked cotton swab.

    If your bowl cannot be easily removed, do not attempt to forcefully remove it.
    WARNING: After cleaning, allow all parts to dry thoroughly before use. Do not get the base wet- it's electric and will break or short circuit.

https://discountenails.com/

SOC Peak Vaporizer Kit

The SOC is a portable concentrate e-rig vape capable of heating up to 600° F in under 30 seconds

Kanboro Tech Sub Dab Pro

 
The Kanboro Tech Subdab Pro Portable e-nail is the higher end big brother to the Subdab Portable e-nail. The Subdab Pro Portable e-nail features a removable 2500 mAh 18650 battery with Micro USB charging which should give you between 35 and 50 uses per full charge. There is a replaceable ceramic cup atomizer to hold your full melt concentrates. The unit comes with a 14mm or 18mm adapter to use with your favorite glass water pipe.


Features & Specifications
Battery: 2500 mAh Removable 18650 Battery
3 Click Turn On/Off
3 Seconds to 400°F, 10 Seconds to 600°F
14 and 18mm Water Pipe Adapter Included
Pure Ceramic Nail For Quick Heating and Clean Taste


1) Subdab is a 2 in 1 portable and water pipe e-nail vaporizer. It can be used alone or with a water pipe bong.
2) Easy to use, portable, durable and powerful. It is small enough to take anywhere, and durable enough to use on the largest water pipes.
3) Heats up in only 3 seconds to 400F, and 10 seconds to 600F, allowing for the best dab conditions.

https://discountenails.com/

Kanboro Tech Sub Dab Pro

Titanium Replacement Nail

Choose size 20mm/16mm/10mm above
(this is the coil size where it attached to the nail)

-Factory Certified Grade 2 Titanium
-6 in 1 fitment for 10/14/18mm male and female rigs
-Fits most all rigs

https://discountenails.com/

Titanium Nail

SB Three Chamber Recycler Rig

 Features a removable mouth piece for easy cleaning
Size: 13.8 Inches Tall
Joint Type: 14mm male
Included Accessories: Glass Bowl (for flower)

https://discountenails.com/

SB Three Chamber Recycler Rig

SB Matrix Percolator Reclaim Rig

 
Size: 11.8 Inches Tall
Joint Type: 18mm Female
Included Accessories: Glass Slide (for flower)

https://discountenails.com/

SB Matrix Percolator Reclaim Rig

Fancier 25mm Axial Style Quartz Banger Nail
-Made for the axial style coil-

 
Includes:
1x Quartz Banger Nail
1x Metal Pin (to secure to coil)

 
Joint Sizes: 10mm, 14mm, 18mm
Joint Types: Male, Female

 
NOTE: Axial Coil is sold separately here:
https://discountenails.com/collections/accessories/products/5-pin-kevlar-coil?variant=32353538605131

Fancier 25mm Axial Style Quartz Banger Nail

Pure Quartz Domeless Straight Nail For 16mm/20mm Coils

-Length=59.5mm
-2mm thick walls

Nail Size:
outer diameter- 15.5mm to fit 16mm coils and 19.5mm to fit 20mm coils

Rig joint size options:
14mm,18mm male or female

https://discountenails.com/

Domeless Straight Electric Quartz Nail-16/20mm coil size

5mm Thick Bottom Domeless Quartz Banger Nail

 
-5mm thick bottom to hold heat longer
-Bowl thickness: 2mm
-factory certified quartz

 
Nail Size:
Outer diameter- 15.5mm to fit 15.8/16mm coils and 19.5mm to fit 19.8/20mm coils
Rig joint size options:
10mm,14mm,18mm male or female

https://discountenails.com/

5mm Thick Bottom Domeless Quartz Banger Nail

Vaportime Thick 18mm Titanium Nail

 
Coil Size Choices: 16mm or 20mm

 
Bottom Rig Fitment: 18mm male joints only
-Medical Grade 2 Titanium-

https://discountenails.com/

Vaportime Thick 18mm Female Titanium Nail

Volcanic Core Electric Banger Nail for 20mm coils

 
-﻿9mm thick bottom
-19.5 outer diameter to fit 20mm coils (also fits 19.8mm coils)
-Arm/Holder/Rest for coil

 
Rig Joint Fitment Choices:
10mm,14mm,18mm male and female

Discount E-Nails

Discount E-Nails products