A Large Variety of Desktop E-Nail Kits, Portable E-Nails, Quartz Nails, Titanium Nails, and Accessories. One Year Warranty, Ships in 24 Hours. 710 your life!

Discount E-Nails

Dabbing

Vaping

Smoking

Crossing Core 2.0 | 2.1 Mini Incycler Recycling Bubbler E-Rig Kit
Model Choice: 2.0 or 2.1
The one you've been waiting for... Core 2.0 e-rig with a black silicone sleeve and carb tether, 4-port spinner carb cap and V5 Heater!!
When heater housing design and art combines! Meet the new rebuildable ceramic coil for the Core 2.0 E-Rig. The RDA V5 Ceramic Heater works on the original Core also. The original Core coil atomizers work on the Core 2.0 too!
 
There are a some key differences between the Core and Core 2.0 e-rigs which are as follows:

Core 2.0 runs V5 heaters, no wire based coils
Atomizers contain only Metal and Ceramic, silicone and PEEK has been replaced with an all ceramic design
Four heat settings are now all for the V5 heaters
Fully rebuildable atomizers – no need to replace the whole housing, just the heater
Decreased pre-heat time
Increased session time
Increased total run time (80 second full run time)
Vortex airflow – included spinner carb cap
“Unbreakable” aluminum carb cap replaces glass bubble carb
Improved button function
Upgraded Stainless Steel Carb Cap Tube


Features

One button functionality for ease of use
Fully heated high polish ceramic vaping surface – elements inside base and walls of heater
Rebuildable atomizer
Vortex Airflow – Aluminum spinner carb cap with carb cap tether
Borosilicate Glass Bubbler
Stainless Steel Carb Cap Tube
Four carefully tuned heat settings
Isolated Aluminum and Glass Vapor Pathway
Low maintenance
Approx. 1 hour 45 minute charging time
3150mah Li-Ion Battery Pack.


What’s Included

Core 2.0|2.1 E-Rig Base
Core Mini Incycler Recycling Bubbler
Aluminum Spinner Carb Cap (based on our design)
Carb Cap Tether (black)
Silicone Base Cover/Sleeve (black)
Atomizer with V5 heater installed
Spare V5 Heater
SS316 Dab Tool (based on our design)
4 x Spare Atomizer Screws
Screwdriver
2 x Spare Carb Cap Tube O-rings
1 x Wall Plug
1 x USB-C Charging Cable
Cotton buds/Q-tips
Alcohol wipes
Special Carrying Case to fit this Glass

Button Functions

Hold – Manual fire up to 60 seconds
Two clicks – Activate session mode – One click to cancel
Three Clicks – Change heat setting
Four Click – Display power level – Red/Low – White/Medium – Green/Full
Five Clicks – Lock or unlock Core 2.0 Base


Sessions times and temperatures

The total session time for the Core 2.0 has been upgraded to 80 seconds, this includes the pre-heat time.

Blue – 12.5 second pre-heat – Approx. 400°
Green – 13 second pre-heat – Approx. 425°
White – 17.5 second pre-heat – Approx. 465°
Red – 22.5 second pre-heat – Approx. 500°


Setup

Charge your base using the provided wall plug and cable.
Fill the bubbler from the top, when it is removed from the base. Ensure any excess liquid has been wiped away and that no water has flooded into the bottom compartment. If this happens turn the bubbler upside down and blow into the air hole at the bottom to clear this section. Then re-fill from the top.

Place bubbler onto Core 2.0 Base at an angle, ensuring that the hole in the bubbler base aligns with the vapor pathway in the Core 2.0 base, then gently and firmly push it straight down into place.

Check small screws in the atomizer base which hold the heater legs are done up fully. These need to be tightened so they are firm, but not so much that they cut the wire legs off the heater. When this is done screw the atomizer into the Core 2.0 base.

Place the carb cap tube on the base so that the wider angled side sits at the top, leaving the carp cab on the tether so that you can load concentrate onto the heater.
Select your desired heat setting (start low if you’re not sure).

Now that’s all done we get onto the vaping methods as there are different ways the Core 2.0 can be used!


Methods of Use

Cold Starts – This method is best for getting the most flavor and material preservation as you start using as soon as vapor is being produced. Using it in this way will cause the session temperatures to be slightly lower than otherwise because the air passing around the heater will decrease heating speed. You can start your session at any point, we suggest keeping an eye on the button flashes so that you can always begin after a set number of flashes, if desired, providing a very consistent and repeatable experience.

Load material into the heater
Press the fire button twice to activate session mode
When your concentrate starts to bubble begin using gently with the carb cap left off
When the Core 2.0 base vibrates place the carb cap back on and continue your use as you normally would
For subsequent sessions just use as desired, when the flavor leaves your material, the vapor becomes harsh or stops being produces press the fire button once more to cancel the session
If you still have material left inside at the end of the session simple hit the fire button twice again and start using immediately, no need to wait for the vibrate as your heater will already be close to adequate temperature. The second session will always run a little hotter than the first if it is started straight after
Hot Starts –  This way allows the heater to reach full temperature for any given setting; so this method is best for getting the maximum cloud production and effects as quickly as possible.

Press the power button twice to activate session mode
Load your material onto your dab tool – rice size
Wait for the Core 2.0 base to vibrate indicating the session temperature has been reached

While using gently load the dab into the heater, then replace the carb cap and use as your normally would

For subsequent sessions you can carry on as desired. The same applies here with regard to finishing your session. If your material is finished hit the fire button once to cancel the session early, if you still have material left simply hit it twice when the session has ended to start it again!

As with cold starts, follow up sessions will always run a little hotter.
Manual – Self explanatory, load a small rice size dab into the heater and hold down the power button. Use as desired.

Manual hold can also be used instead of double pressing to finish a session or heat the heater for easier cleaning.



Cleaning

Wipe out heater with a Q-tip after each use
Clean the area around the RDA heater weekly to stop residue building up
Every month or so wipe out the airway with a Q-tip soaked in ISO – allow to fully dry before use
Replace bubbler water daily
To clean bubbler fill with hot water and shake to remove large residues. Soak in ISO to fully clean. Rinse thoroughly with warm water after soaking.


Safety Features

Over-charge
Over-discharge/Low battery
Over-heat
Low heater resistance
Short-circuit
No atomizer


Certifications

CE Certified
ROHS Certified Materials
FCC Certification
FDA Approved Silicone
UN 38.3 Certified Li-Ion Battery Pack.
Warning Lights – When your Core 2.0 base flashes three times it’s trying to tell you something…

Blue – Short-circuit warning
Green – No atomizer warning
White – Over-heat warning
Red – Low battery warning
 
Warranty information

For all warranty claims please contact the store you purchased from.
The Core 2.0 power base is covered by a one year manufacturer warranty against defects.
The Core 2.0 carry case is covered by a one year manufacturer warranty against defects.
The atomizer is covered by a one week manufacturer warranty against defects.
While atomizers are expected to last much longer than one week, they can be damaged by mishandling and misuse. We understand that not everyone will use the device daily or immediately so offer a one week warranty, from the date of delivery, to report any issue with your atomizer.

Crossing Core 2.0 | 2.1 Mini Incycler Recycling Bubbler E-Rig Kit

Fancier XL 25mm Quartz Banger Nail

Fits only 25mm inner diameter heating coils.

-Factory certified quartz-

The nail fitment is 14/18mm male for rig joint size

Includes:

-1x Quartz Banger Nail

 

*25mm coils sold separately under accessories*

https://discountenails.com/

XL 25mm Quartz Banger Nail 14/18mm Male Joint

Domeless Slanted Quartz Banger Nail

Thickness: 4mm
Coil Fitment Size: 20mm
-Arm/Holder/Rest for coil
Rig Joint Fitment Choices:
10mm,14mm,18mm male and female

https://discountenails.com/

Slanted Quartz Banger Nail- 20mm coil

The Tick E-nail kit features the industry's ONLY auto timing function for a set auto power shut off. This keeps consumers much safer for daily dabbers that leave their E-nail on for long periods of time. The Tick E-nail also features high quality hybrid titanium/quartz nail for optimal flavor hits in a matter of seconds. Its real-time temperature control allows the device to reach a varying temperature range of 0F-999F. It reaches 710 Degrees in 30 seconds. The oversized HD display makes reading and changing the temperature much easier. The body is small (4.3" tall by 2.0" wide), durable and super easy to use!

Nail/Coil Size Choices:

10mm flat/16mm/20mm

The Kit includes:

1x Tick E-nail
1x Titanium/Quartz Hybrid Nail
1x Carb Cap & Dab Tool
1x Power Chord
1x Heating Coil
1x User Manual
1x Elegant Box

Key Features:

    Precise temperature control
    Small, durable, and easy to use
    Optimal flavor hits with ti/quartz hybrid nail
    Temperature range of 0F-999F
    Stable temperature with a +/-5F variance
    Heats up faster with a 30 second warmup
    User set timer function (automatic power off)

https://discountenails.com/

Greenlightvapes G9 Tick E-Nail Controller Kit

Greenlightvapes G9 Tick E-Nail Controller Kit Features An Auto-Power Off Timer And A Micro Size

Fancier E-Nail Quartz Banger Kit
Nail: 4 in 1 Quartz Banger Nail and Adapter
Case Colors: Camouflage or Black Carbon Fiber

Please note the coil inner diameter is only 19.8mm barrel shape
*Reaches 710 degrees in about 3 minutes*
*Temperature range is 0-999 degrees*

 

Every Kit Includes:

1x PID temperature controller Box

1x coil (19.8MM Only)

1x AC power cable(1.5m)

1x Quartz Nail (14&18MM Male Joint)

1x Quartz Carb Cap

1x Glass Adapter(14&18MM Female)

2x Silicone containers

1x Zipper Case

1x User Manual

 

 The quartz nail is both a 14MM and 18MM male joint in one

the glass adapter is a 14MM and 18MM female joint in one.

So every E-Nail kits quartz nail is a 4 in 1 and can fit for both 14MM & 18MM female and fale joints.

(Fits most all rigs!)

 
Fancier E-Nail Specifications:
Brand Name 	Fancier
Key Words 	Fancier Nail, Fancier E Nail, Fancier Nail
Voltage 	AC110V -240V 50-60HZ
Temperature Range 	Room Temperature~999 Degrees °F
Temperature stability 	Approximately 5°F-7°F
Quartz Nail with Adapter Joints: 	14MM Male, 18MM Male, 14MM Female, 18MM Female Joints 4 in 1
Coil Shape 	Barrel (Spiral) 
Length of coil 	1.5 Meter (5ft) Kevlar Fireproof Sheath
Thermocouple Type 	“K” type
PID Dimension/unit 	  3.5 x 1.5 x 5.0 inch (93x37x129mm)

https://discountenails.com/

Quartz Banger E-Nail Kit

Quartz Banger E-Nail Kit With a 4 in 1 Quartz Banger Nail and Adapter. Case Choices of: Camouflage or Black Carbon Fiber

LTQ Vapor Rosin Press Machine KP-1 is a well made Rosin Press Machine for making pure wax/concentrates. It has a small size and high pressure. Withe dual heating plates, it will be very easier to press oil. You just need to wrap the flower body with baking paper and put it in the middle of the heating plate. Press the handle several times to suqeeze the upper and lower heating plates into place and stop for 30s and then wait for wax/concentrates. The LTQ Vapor Rosin Press Machine KP-1 also provides temperature control function. The heating tube will automatically heat to the set temperature. And the recommended temperature is 220℉. 

 

Parameters

Size:195mm x 130mm x 312mm
Using voltage:90-120V, 220-240V
Machine power:200W (100W per heating tube, a total of two heating tubes)
Plate size:115mm x 120mm

Includes:

    1 x Rosin press machine(KP-1) 
    1 x Power cable
    6 x Stickers
    1 x Stainless steel dab tool(A)
    1 x Silicone container
    1 x User manual
    10 x Baking paper
    4 x Magnetic absorption

https://discountenails.com/

LTQ Vapor Rosin Press Machine KP-1

LTQ Vapor Rosin Press Machine KP-1 is a well made Rosin Press Machine for making pure wax/concentrates

2"x4" Rosin Pre-Press Mold

LTQ Vapor 2" x 4" Rosin Pre-Press Mold are fully magnetized for ease of use. Compacted material helps increase your yields and reduces filter bag blowouts during solvent-less concentrate oil extraction process.
?Made with scratch resistant hard anodized 100% 6061 aircraft-grade aluminum.
?Can be used with hand pressure, an Arbor Press or in any of rosin presses.
?Engineered to withstand daily use for years and each component disassembles for easy cleaning.
2" x 4" Mold Specifications
- Internal Dimensions: 1.62" wide x 4.00" long x 0.94" tall
- External Dimensions: 2.40" wide x 4.80" long x 1.57" tall

https://discountenails.com/

LTQ Vapor 2"x4"Rosin Pre-Press Mold

LTQ Vapor 2" x 4" Rosin Pre-Press Mold are fully magnetized for ease of use

Quartz Bowl Insert
(2x Inserts included)

 
Nail Size/Fitment: 16mm or 20mm
-Fits inside quartz nails
-Easier to remove and clean or replace

https://discountenails.com/

Quartz Bowl Insert

Greenlightvapes G9 E-Nail Kit
Size Choice:
20mm/16mm/10mm coil with matching size nail
 
Description:
The G9 classic mini e-nail is a plug-and-play smart PID controller. It is for controlling the hot runner coli heater. This controller is professionally built with XMT-7100 PID and tuned. The Mini e-nail will heat from room temperature to max 1300℉(Approx. 700℃)within 1 to 2 minutes with almost no temperature overshot.
Diameter 10mm coil is flat coil; while 16mm and 20mm coils are barrel shape coils. The coil is rated as 100W under 110VAC. The cable is 5 feet long with black Kevlar Fire retardant sleeve.
The universal nail is made of grade 2 titanium. It has 4 disassemble pieces, which can be configured into male nail or female nail. This makes it a 4 in 1 fitment nail to fit most all rigs.

 
Kit  includes:

    1x G9 classic mini e-nail temperature control box with digital screen
    1x Adjustable titanium nail - 4 in 1 fits most rigs- 10mm/14mm/18mm male and female
    1x 6 ft. removable power cable
    1x 5 ft. long heating coil cord featuring a non-flammable Kevlar sheath
    1x Titanium carb cap with removable dab tool
    1x Product box.

https://discountenails.com/

Greenlightvapes G9 Titanium E-Nail Kit

Greenlightvapes G9 Titanium E-Nail Kit Controller Desktop Package 

LTQ Vapor Rosin Press Machine KP-2

The LTQ Vapor Rosin Press Machine KP-2 is an innovative Rosin Press Machine, which is used for producing wax/concentrate by yourself. You just need to wrap the flower body with baking paper and put it in the middle of the heating plate. Press the handle several times to squeeze the upper and lower heating plates into place. Stop for 30 seconds and then wait for wax/concentrates. The LTQ Vapor Rosin Press Machine KP-1 also provide temperature control functions. The heating tube will automatically heat to the set temperature. The recommended temperature is 220℉. Just get one to enjoy DIY fun!

Parameters
Machine Size:108mm x 145mm x 274mm
Using voltage:90-120V, 220-240V
Machine power:100W
Plate size: 80mm x 80mm

Includes:

    1 x Rosin press machine(KP-2) 
    1 x Power cable
    1 x Stainless steel dab tool(A)
    2 x Sticker
    10 x Baking paper  
    1x Wrench tool 
    1 x Silicone container
    1 x User manual
    4 x Magnetic absorption

https://discountenails.com/

LTQ Vapor Rosin Press Machine KP-2

The LTQ Vapor Rosin Press Machine KP-2 is an innovative Rosin Press Machine, which is used for producing wax/concentrate by yourself

Fancier XL 25mm Quartz Banger E-Nail Kit
Nail: 4 in 1 Quartz Banger Nail and Adapter
Case Colors: Camouflage or Black Carbon Fiber

*Reaches 710 degrees in about 3 minutes*
*Temperature range is 0-999 degrees*

 

Every Kit Includes:

1x PID temperature controller Box

1x coil (25MM Only)

1x AC power cable(1.5m)

1x 25MM Quartz Nail (14&18MM Male Joint)

1x Quartz Carb Cap

1x Glass Adapter(14&18MM Female)

2x Silicone containers

1x Zipper Case

1x User Manual

 

 The quartz nail is both a 14MM and 18MM male joint in one

the glass adapter is a 14MM and 18MM female joint in one.

So every E-Nail kits quartz nail is a 4 in 1 and can fit for both 14MM & 18MM female and fale joints.

(Fits most all rigs!)

 
Fancier E-Nail Specifications:
Brand Name 	Fancier
Key Words 	Fancier Nail, Fancier E Nail, Fancier Nail
Voltage 	AC110V -240V 50-60HZ
Temperature Range 	Room Temperature~999 Degrees °F
Temperature stability 	Approximately 5°F-7°F
Quartz Nail with Adapter Joints: 	14MM Male, 18MM Male, 14MM Female, 18MM Female Joints 4 in 1
Coil Shape 	Barrel (Spiral) 
Length of coil 	1.5 Meter (5ft) Kevlar Fireproof Sheath
Thermocouple Type 	“K” type
PID Dimension/unit 	  3.5 x 1.5 x 5.0 inch (93x37x129mm)

https://discountenails.com/

Fancier XL 25mm Quartz Banger E-Nail Kit

 Fancier XL 25mm Quartz Banger E-Nail Kit Nail: 4 in 1 Quartz Banger Nail and Adapter Case Colors: Camouflage or Black Carbon Fiber

Introducing the LTQ Vapor IE-Nail, a delicate device for wax, concentrates and dry herb! I has two nails, dry herb nail and quartz nail, for your different preference.

The operational device features full temperature control. The fast heating time of 15 seconds will bring you an amazing vaping experience too!

Parameters

Package Size:135mm*75mm*185mm

Product Size:128mm*50mm*15mm  

The length of power line: 1.8m

The length of heating coil wire:1.2M    

Product Weight: 320g

Suitability: wax, concentrates, dry herb
Heating time: 15s
Resistance: 1.6ohm
Voltage: 110v/220v
Power: 100w
Quartz nail and dry herb nail can replaced

Box Contains:

1. IE-Nail Controller
2. Hybrid Ti/Quartz nail/dry herb nail 16mm
3. Carb cap with removable dab tool
4. Power cord
5. Heat coil 16mm
6.User manual
7Canvas bag

https://discountenails.com/

LTQ Vapor IE-Nail Kit

Introducing the LTQ Vapor IE-Nail, a delicate device for wax, concentrates and dry herb!

Fancier Titanium Nail Case Kit
Titanium Nail Sizes: 10mm flat, 16mm, 20mm

(Choose above)
The PID E-Nail controller box controls the hot runner heating coil. The controller will heat from room temperature to 710 degrees in about 3 minutes. Temperature Range is 0-999 Degrees.
The coil is rated at 100W under 110VAC. It is a barrel shaped coil with a 10mm, 16mm, or 20mm inner diameter size choice. The heating coil is 59 inches in length with a black and yellow fire retardant sheath.
Please refer to the included user manual before operating.

The titanium nail bottoms are reversible for a 6 in 1 10mm/14mm/18mm male and female rig fitment.
They fit most all rigs!

Kit Includes:
1x PID Temperature Controller Box
1x Heating Coil
1x Power Cable
1x Titanium Nail
1x Titanium Carb Cap
1x Case
2x Silicon Jars
1x User Manual

 
Fancier E-Nail Features:
Brand Name 	Fancier
Key Words 	Fancier Nail, Fancier E-Nail, Fancier Nail
Voltage 	AC110V -240V 50-60HZ
Temperature Range 	Room Temperature~999 Degrees °F
Temperature stability 	Approximately 5°F-7°F
Titanium Nail with Adapter Joints: 	10MM Male, 14MM Male, 18MM Male, 10MM Female, 14MM Female, 18MM Female- Joints 6 in 1
Coil Shape 	Barrel (Spiral) 
Length of coil 	1.5 Meter (5ft) Kevlar Fireproof Sheath
Thermocouple Type 	“K” type
PID Dimension/unit 	  3.5 x 1.5 x 5.0 inch (93x37x129mm) 
(Approximate Size)

https://discountenails.com/

Fancier Titanium Nail Case Kit

Showerhead Swiss Egg Percolator

 
Size: 10 Inches Tall
Weight: 14 Ounces
Joint Type: 14mm Female
Material: Borosilicate Glass
Included Accessories:
Quartz Banger Nail (for torches), bowl (for flower), silicone dab container

https://discountenails.com/

Showerhead Swiss Egg Percolator

Beyond Glass Beveled Edge Opaque Bottom Quartz Banger With Insert

 
Features:
Nail Outer Diameter: 16mm/20mm
Suited for 16mm/20mm Heating Coils
Nail Joint Type: Male/Female
Nail Joint Size: 10mm/14mm/18mm
Nail Wall Thickness: 2mm
Nail Bottom Thickness: 4mm
Quartz Insert Size: 11mm/15mm

Includes:
1x Quartz Banger Nail
1x Quartz Insert

https://discountenails.com/

Beyond Glass Beveled Edge Opaque Bottom Quartz Banger With Insert

3x Quartz Replacement Dishes

 
Fits on quartz hybrid nails. Dish/Bowl size is 22mm or 25mm(choose above)
25mm is the size that comes with our current e-nail kits
-Thickness is 1.8mm
-Factory certified quartz

 
Included:
3x Quartz Dishes


https://discountenails.com/

Quartz Hybrid Replacment Dishes/Bowls

Crossing Core 2.1 E-Rig Kit  

The Crossing Core 2.1 is a significant upgrade over the Crossing Core 2.0 in several key areas. Firstly, the Core 2.1 features a more powerful 3150mAh battery, providing longer and more consistent performance compared to the Core 2.0. This means that you won't have to worry about running out of power during your dabbing sessions.
 


Non Rebuildable 3D Atomizer

The Core 2.1 features a non rebuildable 3D atomizer which will provide a much higher overall quality. It also removes the need for the tools required to dismantle and put together the Atomizer. Shenzhen Crossing understood that most consumers look for relaxation when vaporizing and the extra rebuild step is simply not worth it. They've been designed for people who aren't comfortable rebuilding their setups. Simply unscrew the old and screw in the new!

* Direct Heat from the Ceramic Bucket
* Ceramic and Stainless Steel Build
* Larger Vapor and Better Taste
* Quicker Warm-up
* Exchangeable

Another major improvement in the Core 2.1 is its precision temperature control system, which allows you to set your desired temperature with greater accuracy. The newest version features 4 temperature settings that are indicated by a color. This results in a much more consistent and enjoyable dabbing experience, as you are able to fine-tune the temperature for your specific concentrates and oils.


Here are the major key differences between the Core and Core 2.1 e-rigs which are as follows: 
 
Core 2.1 runs a rock solid nonrebuildable 3D atomizer, no wire based coils 
Atomizers contain only Metal and Ceramic, silicone and PEEK has been replaced with an all ceramic design 
larger 3150mAh battery
Four heat settings are now all for the 2.1 3D atomizer 
Decreased pre-heat time 
Increased session time 
Increased total run time (80 second full run time) 
Improved button function 
 
 
Core 2.1 Features:
 
One button functionality for ease of use 
Fully heated high polish ceramic vaping surface – elements inside base and walls of heater 
Non-Rebuildable atomizer 
Vortex Airflow – Aluminum spinner carb cap with carb cap tether 
Borosilicate Glass Bubbler 
Stainless Steel Carb Cap Tube 
Four carefully tuned heat settings 
Isolated Aluminum and Glass Vapor Pathway 
Low maintenance 
Approx. 1 hour 45 minute charging time 
3150mah Li-Ion Battery Pack. 
 
 
What’s Included:
 
Core 2.1 E-rig Base 
Core Bubbler 
Aluminum Spinner Carb Cap (based on our design) 
Carb Cap Tether (black) 
Silicone Base Cover/Sleeve (black) 
2.1 3D Atomizer
SS316 Dab Tool (based on our design) 
2 x Spare Carb Cap Tube O-rings 
1 x Wall Plug – US inside – UK included for UK orders 
1 x USB-C Charging Cable 
Cotton buds/Q-tips 
Alcohol wipes 
Upgraded Carry Case 
 
 
Button Functions:
 
Hold – Manual fire up to 60 seconds 
Two clicks – Activate session mode – One click to cancel 
Three Clicks – Change heat setting 
Four Click – Display power level – Red/Low – White/Medium – Green/Full 
Five Clicks – Lock or unlock Core 2.1 Base 
 
 
Sessions times and temperatures 
 
The total session time for the Core 2.1 has been upgraded to 80 seconds, this includes the pre-heat time. 
 
Blue – 12.5 second pre-heat – Approx. 205°C
Green – 13 second pre-heat – Approx. 220° 
White – 17.5 second pre-heat – Approx. 240° 
Red – 22.5 second pre-heat – Approx. 260° 
 
 
Setup 
 
Charge your base using the provided wall plug and cable. 
Fill the bubbler from the top, when it is removed from the base. Ensure any excess liquid has been wiped away and that no water has flooded into the bottom compartment. If this happens turn the bubbler upside down and blow into the air hole at the bottom to clear this section. Then re-fill from the top. 

Place bubbler onto Core 2.1 Base at an angle, ensuring that the hole in the bubbler base aligns with the vapor pathway in the Core 2.1 base, then gently and firmly push it straight down into place. 

Check small screws in the atomizer base which hold the heater legs are done up fully. These need to be tightened so they are firm, but not so much that they cut the wire legs off the heater. When this is done screw the atomizer into the Core 2.1 base. 

Place the carb cap tube on the base so that the wider angled side sits at the top, leaving the carp cab on the tether so that you can load concentrate onto the heater. 
Select your desired heat setting (start low if you’re not sure). 

Now that’s all done we get onto the vaping methods as there are different ways the Core 2.1 can be used! 
 
 
Methods of Use 
 
Cold Starts – This method is best for getting the most flavor and material preservation as you start using as soon as vapor is being produced. Using it in this way will cause the session temperatures to be slightly lower than otherwise because the air passing around the heater will decrease heating speed. You can start your session at any point, we suggest keeping an eye on the button flashes so that you can always begin after a set number of flashes, if desired, providing a very consistent and repeatable experience. 
 
Load material into the heater 
Press the fire button twice to activate session mode 
When your concentrate starts to bubble begin using gently with the carb cap left off 
When the Core 2.1 base vibrates place the carb cap back on and continue your use as you normally would 
For subsequent sessions just use as desired, when the flavor leaves your material, the vapor becomes harsh or stops being produces press the fire button once more to cancel the session 
If you still have material left inside at the end of the session simple hit the fire button twice again and start using immediately, no need to wait for the vibrate as your heater will already be close to adequate temperature. The second session will always run a little hotter than the first if it is started straight after 
Hot Starts –  This way allows the heater to reach full temperature for any given setting; so this method is best for getting the maximum cloud production and effects as quickly as possible. 
 
Press the power button twice to activate session mode 
Load your material onto your dab tool – rice size 
Wait for the Core 2.1 base to vibrate indicating the session temperature has been reached 

While using gently load the dab into the heater, then replace the carb cap and use as your normally would

For subsequent sessions you can carry on as desired. The same applies here with regard to finishing your session. If your material is finished hit the fire button once to cancel the session early, if you still have material left simply hit it twice when the session has ended to start it again! 

As with cold starts, follow up sessions will always run a little hotter. 
Manual – Self explanatory, load a small rice size dab into the heater and hold down the power button. Use as desired. 
 
Manual hold can also be used instead of double pressing to finish a session or heat the heater for easier cleaning. 
 
 
 
Cleaning 
 
Wipe out heater with a Q-tip after each use 
Clean the area around the RDA heater weekly to stop residue building up 
Every month or so wipe out the airway with a Q-tip soaked in ISO – allow to fully dry before use 
Replace bubbler water daily 
To clean bubbler fill with hot water and shake to remove large residues. Soak in ISO to fully clean. Rinse thoroughly with warm water after soaking. 
 
 
Safety Features 
 
Over-charge 
Over-discharge/Low battery 
Over-heat 
Low heater resistance 
Short-circuit 
No atomizer 
 
 
Certifications 
 
CE Certified 
ROHS Certified Materials 
FCC Certification 
FDA Approved Silicone 
UN 38.3 Certified Li-Ion Battery Pack. 
Warning Lights – When your Core 2.1 base flashes three times it’s trying to tell you something… 
 
Blue – Short-circuit warning 
Green – No atomizer warning 
White – Over-heat warning 
Red – Low battery warning 
  
Warranty information 
 
For all warranty claims please contact the store you purchased from. 
The Core 2.1 power base is covered by a one year manufacturer warranty against defects. 
The Core 2.1 carry case is covered by a one year manufacturer warranty against defects. 
The atomizer is covered by a one week manufacturer warranty against defects. 
While atomizers are expected to last much longer than one week, they can be damaged by mishandling and misuse. We understand that not everyone will use the device daily or immediately so offer a one week warranty, from the date of delivery, to report any issue with your atomizer. 

Crossing Core 2.1 E-Rig Kit

Crossing Core 2.0 E-Rig Kit
The one you've been waiting for... Core 2.0 e-rig with a black silicone sleeve and carb tether, 4-port spinner carb cap and V5 Heater!! 
When heater housing design and art combines! Meet the new rebuildable ceramic coil for the Core 2.0 E-Rig. The RDA V5 Ceramic Heater works on the original Core also. The original Core coil atomizers work on the Core 2.0 too! 
  
There are a some key differences between the Core and Core 2.0 e-rigs which are as follows: 
 
Core 2.0 runs V5 heaters, no wire based coils 
Atomizers contain only Metal and Ceramic, silicone and PEEK has been replaced with an all ceramic design 
Four heat settings are now all for the V5 heaters 
Fully rebuildable atomizers – no need to replace the whole housing, just the heater 
Decreased pre-heat time 
Increased session time 
Increased total run time (80 second full run time) 
Vortex airflow – included spinner carb cap 
“Unbreakable” aluminum carb cap replaces glass bubble carb 
Improved button function 
Upgraded Stainless Steel Carb Cap Tube 
 
 
Features 
 
One button functionality for ease of use 
Fully heated high polish ceramic vaping surface – elements inside base and walls of heater 
Rebuildable atomizer 
Vortex Airflow – Aluminum spinner carb cap with carb cap tether 
Borosilicate Glass Bubbler 
Stainless Steel Carb Cap Tube 
Four carefully tuned heat settings 
Isolated Aluminum and Glass Vapor Pathway 
Low maintenance 
Approx. 1 hour 45 minute charging time 
3150mah Li-Ion Battery Pack. 
 
 
What’s Included 
 
Core 2.0 E-rig Base 
Core Bubbler 
Aluminum Spinner Carb Cap (based on our design) 
Carb Cap Tether (black) 
Silicone Base Cover/Sleeve (black) 
Atomizer with V5 heater installed 
Spare V5 Heater 
SS316 Dab Tool (based on our design) 
4 x Spare Atomizer Screws 
Screwdriver 
2 x Spare Carb Cap Tube O-rings 
1 x Wall Plug – US inside – UK included for UK orders 
1 x USB-C Charging Cable 
Cotton buds/Q-tips 
Alcohol wipes 
Upgraded Carry Case 
 
 
Button Functions 
 
Hold – Manual fire up to 60 seconds 
Two clicks – Activate session mode – One click to cancel 
Three Clicks – Change heat setting 
Four Click – Display power level – Red/Low – White/Medium – Green/Full 
Five Clicks – Lock or unlock Core 2.0 Base 
 
 
Sessions times and temperatures 
 
The total session time for the Core 2.0 has been upgraded to 80 seconds, this includes the pre-heat time. 
 
Blue – 12.5 second pre-heat – Approx. 400° 
Green – 13 second pre-heat – Approx. 425° 
White – 17.5 second pre-heat – Approx. 465° 
Red – 22.5 second pre-heat – Approx. 500° 
 
 
Setup 
 
Charge your base using the provided wall plug and cable. 
Fill the bubbler from the top, when it is removed from the base. Ensure any excess liquid has been wiped away and that no water has flooded into the bottom compartment. If this happens turn the bubbler upside down and blow into the air hole at the bottom to clear this section. Then re-fill from the top. 

Place bubbler onto Core 2.0 Base at an angle, ensuring that the hole in the bubbler base aligns with the vapor pathway in the Core 2.0 base, then gently and firmly push it straight down into place. 

Check small screws in the atomizer base which hold the heater legs are done up fully. These need to be tightened so they are firm, but not so much that they cut the wire legs off the heater. When this is done screw the atomizer into the Core 2.0 base. 

Place the carb cap tube on the base so that the wider angled side sits at the top, leaving the carp cab on the tether so that you can load concentrate onto the heater. 
Select your desired heat setting (start low if you’re not sure). 

Now that’s all done we get onto the vaping methods as there are different ways the Core 2.0 can be used! 
 
 
Methods of Use 
 
Cold Starts – This method is best for getting the most flavor and material preservation as you start using as soon as vapor is being produced. Using it in this way will cause the session temperatures to be slightly lower than otherwise because the air passing around the heater will decrease heating speed. You can start your session at any point, we suggest keeping an eye on the button flashes so that you can always begin after a set number of flashes, if desired, providing a very consistent and repeatable experience. 
 
Load material into the heater 
Press the fire button twice to activate session mode 
When your concentrate starts to bubble begin using gently with the carb cap left off 
When the Core 2.0 base vibrates place the carb cap back on and continue your use as you normally would 
For subsequent sessions just use as desired, when the flavor leaves your material, the vapor becomes harsh or stops being produces press the fire button once more to cancel the session 
If you still have material left inside at the end of the session simple hit the fire button twice again and start using immediately, no need to wait for the vibrate as your heater will already be close to adequate temperature. The second session will always run a little hotter than the first if it is started straight after 
Hot Starts –  This way allows the heater to reach full temperature for any given setting; so this method is best for getting the maximum cloud production and effects as quickly as possible. 
 
Press the power button twice to activate session mode 
Load your material onto your dab tool – rice size 
Wait for the Core 2.0 base to vibrate indicating the session temperature has been reached 

While using gently load the dab into the heater, then replace the carb cap and use as your normally would

For subsequent sessions you can carry on as desired. The same applies here with regard to finishing your session. If your material is finished hit the fire button once to cancel the session early, if you still have material left simply hit it twice when the session has ended to start it again! 

As with cold starts, follow up sessions will always run a little hotter. 
Manual – Self explanatory, load a small rice size dab into the heater and hold down the power button. Use as desired. 
 
Manual hold can also be used instead of double pressing to finish a session or heat the heater for easier cleaning. 
 
 
 
Cleaning 
 
Wipe out heater with a Q-tip after each use 
Clean the area around the RDA heater weekly to stop residue building up 
Every month or so wipe out the airway with a Q-tip soaked in ISO – allow to fully dry before use 
Replace bubbler water daily 
To clean bubbler fill with hot water and shake to remove large residues. Soak in ISO to fully clean. Rinse thoroughly with warm water after soaking. 
 
 
Safety Features 
 
Over-charge 
Over-discharge/Low battery 
Over-heat 
Low heater resistance 
Short-circuit 
No atomizer 
 
 
Certifications 
 
CE Certified 
ROHS Certified Materials 
FCC Certification 
FDA Approved Silicone 
UN 38.3 Certified Li-Ion Battery Pack. 
Warning Lights – When your Core 2.0 base flashes three times it’s trying to tell you something… 
 
Blue – Short-circuit warning 
Green – No atomizer warning 
White – Over-heat warning 
Red – Low battery warning 
  
Warranty information 
 
For all warranty claims please contact the store you purchased from. 
The Core 2.0 power base is covered by a one year manufacturer warranty against defects. 
The Core 2.0 carry case is covered by a one year manufacturer warranty against defects. 
The atomizer is covered by a one week manufacturer warranty against defects. 
While atomizers are expected to last much longer than one week, they can be damaged by mishandling and misuse. We understand that not everyone will use the device daily or immediately so offer a one week warranty, from the date of delivery, to report any issue with your atomizer. 

Crossing Core 2.0 E-Rig Kit

Vaportime Flat Plug Style Nail

 
Coil Size Choices: 10mm and 16mm barrel style coils
Bottom Rig Fitment: 14&18mm female rig joints only

 
-Medical Grade 2 Titanium-

https://discountenails.com/

Vaportime Flat Plug Style Nail- 10mm&16mm

Details of reclaim catcher adapter:


    Joint: Female & Male
    Size: 14mm / 18mm (choose size below)
    Weight: About 20g
    Application: Glass Rigs  / Quartz Nails
    Material: Glass
    Color: As Pictured

 
Includes:
1x Glass Drop Down Adapter
1x Glass Bowl
2x keck clips (normally white+blue)

https://discountenails.com/

Glass Dropdown Reclaim Catcher 14/18mm adapter

Diamond Knot Terp Locker/Power Gear Insert
Size: 17mm wide (only fits 25mm+ nails)
Includes:
2x Terp Gear Lockers

 
Insert the power gear into your bucket to increase your heating surface area. Your concentrates will vaporize at a low temperature to give you a nice long, smooth, flavorful dab experience. More terp flavor!

 
-to be used with quartz banger nails with an inner diameter equivalent of 18mm of larger.
(measure the inside diameter of your nail's bowl)

https://discountenails.com/

Terp Locker Diamond Knot Insert Power Gear

Jet Bubbler Percolator Rig

 
﻿Specifications:
Height: 8.5inches
Joint Size: 14mm Female
Weight: 7 Ounces

Included Extras:
Blue Bowl (for flower), Quartz Banger Nail (for torches)

https://discountenails.com/

Jet Bubbler Percolator Rig

SB Twister Coil Inline Recycler Rig
-Features a removable mouth piece for east cleaning-

 
Size: 9.4 Inches Tall
Joint Type: 14mm Female
Included Accessories: Quartz Banger (for torches)

https://discountenails.com/

SB Twister Coil Inline Recycler Rig

Features a removable mouth piece for east cleaning

Beracky Diamond Knot Quartz Nail V2

 
Features:
Nail outer diameter: 19.6mm
Suited for 19.8 and 20mm heating coils
Joint: Male or Female
Joint Size: 14mm, 18mm
Material: Factory Certified Quartz

https://discountenails.com/

Discount E-Nails

Discount E-Nails products